Smart Charger for 25.6V LiFePO4 Battery Packs, 15A

Input
- AC input voltage 90 to 130 VAC, single phase
- Input frequency 47 to 63 Hz
- Efficiency 72% (min) at rating power, 115Vac 60Hz
Output
- Charging terminal : 4' long 8AWG wire 1.9" x 1.5" x 0.6" Standard Anderson connector
- Anderson plug dimension (LxWxH) 1.9"(48.0mm) x 1.5"(38.0mm) x0.6"(15.0mm)
- Included 1 pcs 1.9" x 1.5" x 0.6" Standard Anderson connector without use.
  - In order to match up the charger's connector, you may connect the battery pack charge terminal with Included 1 pcs 1.9" x 1.5" x 0.6" standard Anderson connector.
  - Make sure the charge DIY wire will be acceptable for 15A max charge current.
Charge
- CCCV (Constant Current Constant Voltage) charging mode
- Cut-off voltage, 29.6VDC
- 15A current max.
- The battery range is between 20Ah to 40Ah
- Reverse polarity protection
- Short circuit protection
- No trigger voltage requirement
- Built in cooling fan to ensure charger long service life
Physical:
- Dimension (LxWxH) 8.3"(210mm)x6.9"(174mm)x3.0"(76mm)
- Weight: 5.2 lbs (2358grams)

Wrong polarity will damage the charger. SuperDroid Robots is NOT responsible for the damage or losses caused by misusing. Review our terms prior to purchasing.
Only charge LiFePO4 battery pack with capacity > 20Ahr. Don't use the charger for lower capacity LiFePO4 battery pack. Check with battery manufacturer prior to use..
Only charge LiFePO4 battery pack with voltage 25.6V (8 cell pack). Don't use the charger for Lower voltage battery pack which may cause battery to explode.
SuperDroid Robots is not responsible for any damage caused by misuse.
Must read before placing an order.
We reserve the right to not sell the battery to any one if we feel they cannot handle battery safely
For safety warning please see the link here