SuperDroid Robots
Robots, Parts, & Custom Solutions
##GOOGLEPLUS##
##PINTEREST##
Category
NiMH and NiCad Chargers for robot kits.
Category List
Smart Charger for 9.6V - 18V NiMH and NiCad
Item Details
Smart Charger for 9.6V - 18V NiMH and NiCad
Item Name:
Smart Charger for 9.6V - 18V NiMH and NiCad
Item #:
TE-106-018
Your Price:
$28.95
Availability:
14 Ready to Ship!
Quantity:

Product Image Gallery:

Description:

Multi-Current Smart Charger (0.9 - 1.8A) For any 9.6V - 18V NiMH / NiCad Battery Packs

Features and Specifications:

  • Universal Fast Smart Charger is designed for charging any NiMH / NiCd Battery Pack from 9.6V - 18V, for 8 to 15 cells pack.
  • LED flashing red-green-red before charging (no battery connection) in order to test the IC of the charger if ready to use.
  • It is a very smart charger. Just plug it in and wait for the battery to get fully charged. Red LED indicates charging and Green LED means fully charged
  • Short circuit protection: No output voltage from the charger if the battery is not connected.
  • 120-240V AC input for worldwide use.
  • Built in temperature sensor to double ensure the battery pack from overcharging.
  • Battery temperature sensor wire is included for your battery.
  • Auto detects battery pack voltage and sets up proper charging voltage.
  • Cuts off power automatically by negative delta V IC when battery pack is fully charge.
  • Built in IC protecting battery from over current, short circuit & reverse polarity.
  • One temperature sensor outlet (Female BEC connector) is installed with the charger for double protection of battery from being overcharged.
  • You must use temperature sensor to charge 12V or higher NiMH battery pack.
  • For <12V battery pack, you may recharge battery without sensor. However, putting a temperature sensor on the battery pack is always a good idea.
  • Two current levels: 0.9A and 1.8A selectable by a switch for both low (< 2800mAhr) and high capacity battery pack (> 2800mAhr)
  • For battery packs between 900mAhr and 2800 mAh, please use the low level switch -- charging rate: 0.9A
  • For battery packs over 2800 mAhr, please use the high level switch -- charging rate: 1.8A
  • The smart charger will cut-off power automatically when battery is full. However, Charging time can be estimated as the follow:
  • Time ( Hrs ) = Battery capacity (Ah) / Charging current ( 0.9A or 1.8A )
  • Dimensions: 140mm x 64mm x 38mm (5.5" X 2.5" X 1.5")
  • Weight: 272g (0.6 lb)
  • One 5' cable with female Tamiya connector and two clips which allow you to connect a battery pack to the smart charger.
  • One temperature sensor (70 C thermister) is included for battery packs that don't have thermostat protection. It must be connected between battery charger and the battery pack before charging to protect battery from overcharging. It will cut-off power if battery temperature is over 70 C.
  • How to use Temperature sensor:
    1. Attach temperature sensor to battery pack inside firmly --- you can use electronic tape or glue to attach the sensor to the battery's surface
    2. Plug (red, BEC ) connector into the temperature socket into the charger

Documentation and Support:

Warning:

  • Please don't use the charger to charge battery pack with capacity less than 900 mAh
  • If your battery pack is 12V or more, always use temperature sensor (included) to double ensure power cut-off. The temperature sensor must be attached to battery pack firmly by electric tape or glue (see above to see how)
  • If you have questions on what current setting to use, please check the battery specification to find out what is the maximum charging current before selecting the charging current.
  • The charger is designed for indoor use only.
  • The charger should be horizontally positioned and work in well ventilated conditions, avoid moisture and keep it away from inflammable explosive goods.
  • Ambient temperature shall not be more than 40 degree C when using the charger.
  • Remove the AC power before connecting or disconnecting the charger with batteries.
 



Multi-Current Smart Charger (0.9 - 1.8A) For any 9.6V - 18V NiMH / NiCad Battery Packs
Support Links
Related Items
Smart Charger for 4.8V - 10.8V NiMH and NiCad
TE-106-010

Multi-Current Smart Charger ( 1-2 A ) For any 4.8V - 10.8V NiMH / NiCad Battery Packs

$26.95
22 Ready to Ship!

Smart Charger Extra Temperature Sensor
TE-107-000

Extra Temperature Sensor for the Smart Chargers.

$3.99
11 Ready to Ship!

New Items
NEW Prebuilt Wi-Fi Enclosed 4WD Tactical Robot with Tablet Controller - IG42 SB
TP-500-167

A Prebuilt Enclosed wheeled robot platform. Equipped with an enclosed aluminum weather resistant chassis, four 42mm gear motors, custom 27x PTZ camera system, and fully assembled, ready to run. Perfect for indoor and/or outdoor surveillance or inspection.

$6,530.00
1 Ready to Ship!
U.FL to RP-SMA Jack Bulkhead, Pigtail .5m / 20in Mini Coax
TE-205-020

Coaxial pigtails are used to connect wireless radios to antennas and other equipment. This series features pigtails which support U.FL connectors & 1.13 Mini Coax.

$14.95
18 Ready to Ship!
Powered by SuperDroid Robots, Inc