With their wide hubs and finished bores, these sprockets are ready to mount to a shaft. All are made of steel, include two set screws, and are designed for use with ANSI single-strand chain. For our IG32 motors which require a 6mm bore, a 1/4" bore will work fine for most applications. We also have an 8mm bore option which is required for our IG42 motors.
Below is a list of our available sprockets and their specifications. This product is in bold red.
Note: If you select the 8mm bore option with this sprocket, we suggest adding the optional roll pin as the hub wall is too thin for a set screw.
This is a custom part. Please allow 2-4 days for shipping.
This is set screw lock collar. It is for a 0.50 or 1/2 inch shaft. They are steel and zinc coated.
Our high quality ANSI#25 steel roller chain is very durable and can be used with our ANSI #25 roller chain sprockets.
This is a MLT-JR tracked programmable robot platform and is equipped with 32mm motors, motor controller, and Arduino. This Arduino robot can be programmed to be a autonomous robot.
Components required to track pulses on 4 encoders in tandem with Sabertooth/SyRen motor controllers.