Description

Digi’s xBee Pro is a 2.4GHz radio that makes wireless communication between devices simple and easy! The modules pack a powerful 60mW signal that allows for long range communication. The module outputs a 3.3V TTL serial signal that can easily communicate with a microcontroller like the Arduino. Based on the popular Zigbee platform and the IEEE 802.15.4 stack these modules provide simple and reliable wireless communication for your next project!

Features and Specifications

• Performance:
  • Indoor/Urban Range: Up to 300' (100m)
  • Outdoor RF line-of-sight Range: up to 1 mile (1500m)
  • Transmit Power Output (software selectable): 60 mW (18 dBm) conducted, 100 mW (20 dBm) EIRP
  • RF Data Rate: 250,000 bps
  • Serial Interface Data Rate (software selectable): 1200-115200 bps (non-standard baud rates also supported)
  • Receiver Sensitivity: -100 dBm (1% packet error rate)
• Power Requirements:
  • Supply Voltage: 2.8 - 3.4 V
  • Transmit Current (typical):
    • if PL=0 (10dBm): 137mA(@3.3V), 139mA(@3.0V)
    • PL=1 (12dBm): 155mA (@3.3V), 153mA(@3.0V)
    • PL=2 (14dBm): 170mA (@3.3V), 171mA(@3.0V)
    • PL=3 (16dBm): 188mA (@3.3V), 195mA(@3.0V)
    • PL=4 (18dBm): 215mA (@3.3V), 227mA(@3.0V)
  • Idle / Receive Current (typical): 55mA (@ 3.3 V)
  • Power-down Current: < 10 µA
• General:
  • Operating Frequency: ISM 2.4 GHz
  • Dimensions: 0.960” x 1.297” (2.438cm x 3.294cm)
  • Operating Temperature: -40 to 85º C (industrial)
  • Antenna Options: Integrated Whip, Chip or U.FL Connector

Documentation and Support

• XBee Multipoint RF Modules
• XBee Mechanical Drawings
• XBEE/XBee-PRO RF Modules
• XBee™ Features Guide