Prototype LT robot with Chasis, treads, wheels and camera with tilt.  The tracks are driven by two drive wheels via friction and two idler wheels.  The inside of the track is painted with rubber epoxy to provide traction from the wheels. The tracks have rubber guide cleats screwed in.  The robot does NOT include motors with #25 sprockets and chain.  Recommended motors are IG-52 motors (Qty 2), 136RM, 285RPM, or 290RPM. 

The chassis is aluminum with two access covers on the bottom.   Wheels are 6" diameter.  The tracks are 4" wide 18.5 center to center.  Total width of the robot is 15 3/4 inches. (including the track).  Total height (to top of roll bar) is 10inches. 

Kit includes a switch, 2 mounted LEDs, IR Camera, camera tilt servo housing, roll cage, chassis with covers, 2 idler wheels, 2 drive wheels with #25 chain sprockets, 2 tracks, motor mount plates. 

Does not inlcude motors, controller, batteries, etc.