Hardware
12mm Hex Mounting Hub for 6mm Shaft (2-Pack)
Works with any motor with a 6mm shaft Each hub includes screws to mount the hub to the shaft. Not..
Product Code: TD-305-000
7 In stock
Adapter plate
This adapter plate is a part we made for ourselves for convenience. It has a D shaped hole in it th..
Product Code: TE-293-004
Out of stock
Aluminum Female Threaded Hex Standoff
Tighten standoffs with a wrench. The flat sides of the hex ensure a firm grip. Aluminum is lightw..
Product Code: TD-284-000
305 In stock
Assorted Roll Pin Kit
This kit includes an assortment of rollpins. We use rollpins often when coupling a sprocket to a sha..
Product Code: TD-280-000
10 In stock
ATR and Vectoring Robot Hardware Kit
This includes a bunch of hardware you can use to fasten your controllers etc to the vectoring and AT..
Product Code: TD-021-000
25 In stock
IG32 and IG42 Motor Plate Hardware Kit
This is a hardware kit used to mount the IG32 and IG42 motor plates in the IG32 SB and IG42 SB platf..
Product Code: TD-166-000
68 In stock
IG52 Motor Plate Hardware Kit
This is a hardware kit used to mount the IG52 motor plate in the IG52 SB platform. This kit include..
Product Code: TD-291-000
Out of stock
M3 Steel Mounting Screw, 8mm Length, Pan Head, Phillips Drive (Pack of 16)
We recommend using the M3 steel mounting screw to mount IG32 motors...
Product Code: TD-165-308
50 In stock
M4 Steel Mounting Screw, 12mm Length, Pan Head, Phillips Drive (Pack of 16)
We recommend using the M4 steel mounting screw to mount IG42 motors. We use these in our IG42 DB Rob..
Product Code: TD-165-412
133 In stock
M4 Steel Mounting Screw, 8mm Length, Pan Head, Phillips Drive (Pack of 16)
We recommend using the M4 steel mounting screw to mount IG42 motors...
Product Code: TD-165-408
55 In stock
M5 Steel Mounting Screw, 12mm Length, Pan Head Phillips (Pack of 16)
We recommend using the M5 steel mounting screw to mount IG52 motors. We use these in our Custom Leng..
Product Code: TD-165-512
32 In stock
M5 Steel Mounting Screw, 16mm Length, Pan Head, Phillips (Pack of 16)
We recommend using the M5 steel mounting screw to mount IG52 motors. We use these in our Custom Leng..
Product Code: TD-165-516
47 In stock
Roll Pin, 1/8" x 1" Long (pack of 4)
Set of 4 roll pins. We often use these with our #25 sprockets to mount them to the motor shaft...
Product Code: TD-182-100
10 In stock
Roll Pin, 1/8" x 3/4" Long (pack of 4)
Set of 4 roll pins. We often use these with our #25 sprockets to mount them to the motor shaft...
Product Code: TD-182-075
10 In stock
Roll Pin, 3/32" x 1" Long (pack of 4)
Set of 4 roll pins. We use these to fix a sprocket or gear to a 6mm shaft...
Product Code: TD-181-100
10 In stock
Servo Standoff Mounting Hardware
This is all the necessary hardware to mount a standard servo to a flat surface. It is used to mount ..
Product Code: TD-024-000
12 In stock