Features and Specifications

The multi-ply treads have an aggressive black rubber all-terrain 2.75" wide pattern. The inside of the tracks have a internal cleat that is used for positive timing to match the CNC manufactured LT2 wheels. The tracks have UHMW tapered guides screwed into the side that are matched with the taper on our generation 4 wheels. This allows for better tracking and very low probability of derailing. The track does NOT have a splice! Its continuous. The nominal center to center distance of these tracks with the LT2 wheels is 19.875". The weight of each track is ~3lbs.

The wheels are CNC cut from 1/2" thick Rubber and sandwiched between 1/2" UHMW that are chamfered. Each wheel has a bearing to fit on a 1/2" diameter shaft. The drive wheel has a #25 32 tooth chain sprocket mounted to it. The idler wheel is the same as the drive wheel, less the sprocket and timing teeth on the 1/2" thick rubber. The wheels come assembled. Each wheel weighs ~1.25lbs.

The tracks can be ordered with a custom length. Since they are molded, a custom length will take up to 6 weeks to complete.

  • Width: 2.8"
  • Length (inside circumference): 60.5" (custom lengths can be selected as an option below)
  • Pitch of Timing Cleats: 1.89"
  • # of Timing Cleats: 32
  • Wheel Spacing (nominal): 19.88" (6.6" OD Wheels)

Delivery

  • This item is Built to Order 4-7 Days.
  • For custom length tracks, please allow up to 8 weeks.
  • Actual delivery may vary based on workload or if custom length is required, contact us for a more accurate delivery time or if you need it sooner.

This is a pair of All Terrain reinforced 2.75 inch wide matched treads for the LT2 Treaded Robot. These are the generation 4 design. They have 4 ply mesh reinforcement, molded rubber with no splice. If you want just the tracks, see our 4th generation LT2 set of tracks.

We keep standard length tracks in stock. Any other lengths need to be special ordered. Custom orders should be specified by the number of pitches. See the Track Length Per Pitch Chart under the documentation section for available lengths.

LT2 Pair of Molded Spliceless Tracks and Wheel Set - Generation 4

  • Brand: SuperDroid Robots
  • Product Code: TD-142-002
  • Availability: Built to Order 4-7 Days
  • $1,050.00



Available Options


Related Products

LT2 - 2.75 inch Wide Molded Track Set - Generation 4

LT2 - 2.75 inch Wide Molded Track Set - Generation 4

This is a pair of All Terrain reinforced 2.75 inch wide matched treads for the LT2 Treaded Robot. ..

$490.00

MLT-JR Pair of Molded Spliceless Tracks and Wheel Set

MLT-JR Pair of Molded Spliceless Tracks and Wheel Set

This is a pair of All Terrain reinforced 2 inch wide matched treads for the MLT-JR Treaded Robot. ..

$189.00

LT2 Track Wheels - Generation 4

LT2 Track Wheels - Generation 4

This is a set of 4 wheels. The wheels are CNC cut from 1/2" thick Rubber and sandwiched between 1/2"..

$579.00