Headers, Connectors, and Jumper Wire

An assortment of Headers, Connectors and Jumper Wires.

Category Items

Molex 2-Pin JST-PA Secure Lock Connector Set - 5 Pack Molex JST-PA Secure lock connector set with 0.100" pitch. This set features (5) 2-pin headers, (5) housings, and (15) 22-AWG crimps. TE-633-000 $4.25 Not Available	Panel Mount 2.1mm x 5.5mm Power Jack 5A Panel mount jack for 2.1mm x 5.5mm barrel connector. Replaces TE-209-000. TE-371-000 $1.49 Out of Stock. Contact us for availability.
Right Angle 2.5mm Power Plug with 6ft of 18 gauge wire This is a 2.5mm x 5.5mm right angle barrel plug with 6ft of 18 gauge wire. This will plug into our camera receivers and some of our cameras. TE-069-006 $6.00 Not Available	45 Amp Connector Set 45A connectors for the batteries or whatever. Anderson Powerpole Connectors. TE-027-045 $4.05 Not Available
Right Angle 2.1mm Power Plug with 6ft of 18 gauge wire This is a 2.1mm x 5.5mm barrel plug with 6ft of 18 gauge wire. This will plug into our camera receivers and some of our cameras. TE-069-004 $5.99 Not Available	Straight 2.1mm Power Plug with 6ft of 18 gauge wire This is a 2.1mm x 5.5mm barrel plug with 6ft of wire. This will plug into our camera receivers and some of our cameras. TE-069-003 $5.25 Not Available
Right Angle 1.35mm Power Plug with 6ft of wire This is a 1.35mm x 5.5mm barrel plug with 6ft of wire. This will plug into our camera receivers and some of our cameras. TE-068-002 $2.92 Not Available	Straight 1.35mm Power Plug with 6ft of wire This is a 2.1mm x 5.5mm barrel plug with 6ft of wire. This will plug into our camera receivers and some of our cameras. TE-068-001 $3.00 Not Available
Straight 2.5mm Power Plug with 6ft of wire This is a 2.5mm x 5.5mm barrel plug with 6ft of wire. This will plug into our camera receivers and some of our cameras. TE-069-005 $2.75 Not Available	DB15 Female Solder Cup Connector DB15M Connector with Solder Cup Termination TE-104-632 $1.81 Not Available
Seal Cap Seal one of our low profile (RJ 45 Ethernet) waterproofable A, plastic connectors with this item. TE-293-003 $3.75 Not Available	RJ45 Waterproof Coupler This RJ 45 (Ethernet) waterproof connector is sealed and ready to be installed into your case, controller, brief, tote, detonator, or anything else you might be installing it on. TE-293-002 $18.25 Not Available
RJ45 Field Installable Connector This connector kit will allow you to turn your existing RJ45(Ethernet) connector into a waterproof, rugged connector, that can seal to IP68 when connected to one of our female panel connectors. TE-293-001 $12.75 Not Available	Cable for Garmin LIDAR-Lite v3 Hook-up cable for LIDAR-Lite V3 Laser Rangefinder. Can be used hookup the LIDAR Lite V3 Range finder or for multiple projects. TE-292-000 $8.39 Not Available
6-pin Molex Microfit 3.0 This is a molex connector used for encoder input in Roboteq XDC2460, MDC2460, MDC2230. TE-287-006 $1.99 Not Available	5mm 3 Position PCB Terminal Block 5mm screw terminal block, 3 position, PCB mount TE-282-003 $1.43 Not Available
5mm 2 Position PCB Terminal Block 5mm screw terminal block, 2 position, PCB mount TE-282-002 $0.75 Not Available	8 Position Jumper Terminal This 8-position jumper can connect up to 8 terminals on barrier strips and can be cut for fewer than 8 positions. TE-275-008 $3.58 Not Available
8 Pos 2 Row Barrier Terminal Strip This 8-Position dual-row barrier strip lets you access wiring without disturbing the circuit. Barriers help prevent short circuits. For hobby projects and robot wiring. TE-085-008 $4.25 Not Available	6 Pos 2 Row Barrier Terminal Strip This 6-Position Dual-Row Barrier Strip lets you access wiring without disturbing the circuit. Barriers help prevent short circuits. For hobby projects and Robot wiring. TE-085-006 $4.44 Not Available
4 Pos 2 Row Barrier Terminal Strip This 4-Position Dual-Row Barrier Strip lets you access wiring without disturbing the circuit. Barriers help prevent short circuits. For hobby projects and Robot wiring. TE-085-004 $3.85 Not Available	Assorted Headers 0.1" spacing These are assorted headers that are great for many projects. They are spaced with the standard 2.54mm or 0.1". (5) 2, 3, and 4 pin headers. (3) 5 pin headers, and (2) 10 pin headers. TE-266-000 $1.09 Not Available
Arduino 14.5mm Strip 1x2 2 pcs This authentic Arduino pair of 2 pin Female/Male header strips is very useful for connecting Arduino board extensions. TE-170-002 $0.95 Not Available	Arduino 14.5mm Strip 1x4 2 pcs This authentic Arduino pair of 4 pin Female/Male header strips is very useful for connecting Arduino board extensions. TE-170-004 $0.95 Not Available
Arduino 2x18 Stackable Header This is a 2x18 shield header for the Arduino. 36 pins in total. For Arduino Mega. Very useful for connecting Arduino shields. TE-170-236 $1.59 Not Available	Prototype Board - 4 pack This prototype board measures 5cm by 7cm. The 24 lettered columns and 18 numbered rows provides more than enough space for a securely prototyped circuit. TE-217-101 $2.50 Not Available
Molex 2-Pin Friction Lock Connector Set - 5 Pack Molex friction lock connector set with 0.100" pitch. This set features (5) 2-pin headers, (5) housings, and (15) 22-AWG crimps. TE-252-205 $4.25 Not Available	DB15 Male Solder Cup Connector DB15M Connector with Solder Cup Termination TE-104-631 $1.55 Not Available
Jumper Wire 10-Piece 1-Pin Rainbow Assortment F-M 4" These jumper wires make it easy to interface your project or breadboard to an Arduino, Beagle Bone, or Raspberry Pi. They are stranded 26 awg wires with a male and female termination. The wire are assorted colors. TE-219-010 $2.95 Not Available	Long Header Set 40x1 This long break-away header set allows you to easily connect Arduino shields to Arduino boards or as connecting headers for breadboards. TE-169-140 $1.16 Not Available
Breadboard - Mini Modular (Black) This black mini breadboard features 170 tie points and provides enough space to test simple circuits. The breadboard features an adhesive backing and two screw mounting points to securely attach it to your robot! TE-217-002 $3.95 Not Available	Breadboard - Mini Modular (Blue) This blue mini breadboard features 170 tie points and provides enough space to test simple circuits. The breadboard features an adhesive backing and two screw mounting points to securely attach it to your robot! TE-217-001 $3.95 Not Available
Arduino 2x3 ICSP Female Stackable Header This is a 2x3 ICSP shield header for the Arduino. Very useful for connecting Arduino shields. TE-170-206 $0.95 Not Available	2-Pin Female JST XHP-Style Connector with 6 inch Wires This 2-pin female JST-XHP connector has 6-inch (15-cm) 22 AWG wires that mates with our Ethernet switch modules. TE-212-001 $0.99 Not Available
3.5mm 8 Position Terminal Block 3.5mm screw terminal block, 8 position, PCB mount TE-210-008 $2.97 Not Available	3.5mm 5 Position Terminal Block 3.5mm screw terminal block, 5 position, PCB mount TE-210-005 $2.55 Not Available
3.5mm 3 Position Terminal Block 3.5mm screw terminal block, 3 position, PCB mount TE-210-003 $1.17 Not Available	3.5mm 2 Position Terminal Block 3.5mm screw terminal block, 2 position, PCB mount TE-210-002 $0.53 Not Available
Panel Mount 2.1mm x 5.5mm Power Jack Panel Mount for 2.1mm x 5.5mm barrel plug power jack. Assembly has a diameter of 11.60mm and has a depth of 13.00mm. Perfect for providing a power interface for enclosures. TE-209-000 $1.69 Not Available	2.1mm Cable Assembly Female 6” 2.1mm (5mm) female barrel plug assembly with 6” 18AWG wire leads. Perfect for interfacing your project with any compatible AC power transformer. TE-208-000 $3.75 Not Available
Female Spade Terminal with Heat Shrink (Pack of 4) This is a 4-pack of female spade terminal ends (F2 Terminals, 0.250" FASTON receptacles) and heat shrink. TE-207-000 $1.69 Not Available	3-Pin Female JST PH-Style Cable for Sharp Distance Sensors (30cm) This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. TE-192-000 $0.99 Not Available
Arduino 14.5mm Strip 1x10 2 pcs This pair of authentic Arduino 10 pin Female/Male header strips is very useful for connecting Arduino board extensions. TE-170-010 $1.20 Not Available	Arduino 14.5mm Strip 1x6 2 pcs This authentic Arduino pair of 6 pin Female/Male header strips is very useful for connecting Arduino board extensions. TE-170-006 $0.95 Not Available
Arduino 14.5mm Strip 1x8 2 pcs This authentic Arduino pair of 8 pin Female/Male header strips is very useful for connecting Arduino board extensions. TE-170-008 $1.10 Not Available	Arduino Header Set 40x1 This authentic Arduino snappable header set allows you to easily connect Arduino shields to Arduino boards. TE-169-040 $0.50 Not Available
Stackable 0.100" Female Header Set for Arduino Shields These stackable 0.1" (2.54 mm) female headers are just the right height for connecting Arduino shields to Arduinos and other shields. TE-163-000 $1.99 Not Available	Pololu Premium Jumper Wire 50-Piece Rainbow Assortment M-F 6" These premium jumper wires are stranded 26 awg wires with female terminations on one end and male terminations on the other end. TE-158-003 $12.49 Not Available
Pololu Premium Jumper Wire 50-Piece Rainbow Assortment M-M 6" These premium jumper wires are stranded 26 awg wires with male terminations on both ends, for use with 0.1" (2.54 mm) female headers and breadboards. The assortment of 6" (15 cm) wires includes 5 each of 10 different colors. TE-158-002 $12.49 Not Available	Pololu Premium Jumper Wire 50-Piece Rainbow Assortment F-F 6" These premium jumper wires are stranded 26 awg wires with * female terminations on both ends, for use with 0.1" (2.54 mm) male headers and breadboards. The assortment of 6" (15 cm)* wires includes five each of 10 different colors. TE-158-001 $12.49 Not Available

Pages: 1 2

Support Links

General Support

News and Updates

Careers

Blog

Twitter

Facebook

Instagram

YouTube

Request a Quote

Schedule a Demo

1-919-557-9162

New Items

NEW Prebuilt - 4WD IG52-DB-E Heavy-Duty All-Terrain Enclosed Platform

TP-500-328

Ready to ship prebuilt all-terrain enclosed platform! This is a heavy-duty robotic platform with IG52 136 RPM motors, an enclosed chassis, 80/20 1" extruded aluminum rails, and RC control system.

$2,429.00

Not Available

Autonomous GPS 4WD Robot

TP-302-001

This is a 4WD IG42-SB platform that is set up for outdoor positioning and autonomous navigation. The ATR robot is powered by an on-board CubePilot system that's built on top of the versatile and open source ArduPilot software suite. Replaces TP-600-455.

$3,909.98

Built to Order
4-6 Weeks

Headers, Connectors, and Jumper Wire

Robots for Sale

Related Services

Help

Social Networking