Analog 2-Axis Joystick with Plastic Boot
Category
Joysticks
Joysticks for making your own control system. We use these same joysticks in our control Systems.
Category List
• Specials
Specials
 Analog 2-Axis Joystick with Plastic Boot
Item Details
Analog 2-Axis Joystick with Plastic Boot
Item Name:
Analog 2-Axis Joystick with Plastic Boot
Item #:
TE-153-002
Your Price:
$19.99
Not Available
Quantity:

Description:

This a high quality 2 axis joystick with a plastic boot. Spring return to center (springs can be removed). Each Axis is attached to a 5k ohm linear potentiometer. The potentiometers mounted on the gimbals are adjustable to adjust the center point. The joysticks move 50 degrees in each direction and utilize the full range of 5K ohm potentiomenter for maximum sensitivity.

This a high quality 2 axis joystick with a platic boot. Spring return to center (springs can be removed). If you plan on removing the springs a rubber boot will act on the joystick slightly, this plastic boot has no resistance on the joystick.

The potentiometer travels full range ~0k to ~5k with full travel of joystick with ~2.5k in the center. (If you hook ground to one leg, 5V to the other leg, you will get a 0-5V analog output on the middle sweeper arm, with 2.5V in the center position.) IT IS VERY IMPORTANT TO METER THE POTENTIOMETERS WITH A OHM METER BEFORE JUST HOOKING UP VOLTAGE. IF HOOKED UP WRONG, THEY WILL BE DAMAGED. (Typically, the middle leg is the sweeper and the outsides are the two sides of the pot. Measuring the resistance between them determines this. Its 5K ohms between the outsides; 2.5K from center to either side and as you move the joystick it varies.)

Includes plastic boot and flange with mounting screws as shown in picture.

Features and Specifications:

  • Resistance: 5k ohms
  • Resistance Tolerance: 5%
  • Independent Linearity Tolerance: 1%
  • Resolution: Infinity
  • X and Y Axis Rotational Angle: 50 degrees
  • Operating Torque: 440gf
  • Rotational life expectancy: 5000,000 times
  • Operating Temperature: -10 deg C to 80 deg C
  • Dimensional Data: See PDF Drawing

Documentation and Support:

 
 This a high quality 2 axis joystick with a platic boot. Spring return to center (springs can be removed). If you plan on removing the springs a rubber boot will act on the joystick slightly, this plastic boot has no resistance on the joystick.
Related Items
Analog 3-Axis Joystick
Analog 3-Axis Joystick
TE-128-003

This a high quality 3 axis joystick with a rubber boot. Spring return to center (X & Y springs can be removed). Two joysticks move 50 degrees in the X and Y direction. The 3rd axis is a twist knob with a spring return.

$29.99
Not Available

Analog 2-Axis Joystick
Analog 2-Axis Joystick
TE-128-002

This a high quality 2 axis joystick with a rubber boot. Spring return to center (springs can be removed). The joysticks move 50 degrees in each direction and utilize the full range of 5K ohm potentiomenter for maximum sensitivity.

$19.99
Not Available

New Items
LT2 Pair of Molded Spliceless Tracks and Wheel Set - Generation 4
LT2 Pair of Molded Spliceless Tracks and Wheel Set - Generation 4
TD-142-002

This is a pair of All Terrain reinforced 2.75 inch wide tracks with 4 wheels for the LT2 Treaded Robot. These are the generation 4 design. They have 4 ply mesh reinforcement, molded rubber with no splice. Custom lengths can be ordered.

$990.00
Built to Order
2-6 Weeks
66-Channel LS20031 GPS Receiver Module (MT3339 Chipset)
66-Channel LS20031 GPS Receiver Module (MT3339 Chipset)
TS-066-000

The Locosys LS20031 GPS receiver integrates a MediaTek MT3339 66-channel GPS chip with a ceramic antenna to create a complete GPS module that can track up to 66 GPS satellites at a time. The GPS module supports up to a 10Hz update rate.

$49.95
Not Available
Powered by SuperDroid Robots, Inc