MLT-JR Pair of Molded Spliceless Tracks and Wheel Set

Description

This is a pair of All Terrain reinforced 2 inch wide matched treads for the MLT-JR Treaded Robot. They have 4 ply mesh reinforcement, molded rubber with no splice. If you want just the tracks, you can get our 2 inch Wide Molded Track Set.

Features and Specifications

The multi-ply treads have an aggressive black rubber all-terrain 2" wide pattern. The tracks have a half inch hole punched into them with 25mm that is used for positive timing to match the CNC manufactured wheels. This allows for better tracking and very low probability of derailing. The track does NOT have a splice! Its continuous. The nominal center to center distance of these tracks with the MLT-JR wheels is 8.25". The weight of each track is ~ 7 oz.

The wheels are CNC cut from .25" thick UHMW and are roughly 3.563 inches in diameter (not including the spikes). With the tread thickness and spikes, the total height of the tread on the wheel from the ground up is 4.18 inches. The drive wheel has a hub mounted to it that has a 6mm bore. The idler wheel is the same as the drive wheel, except it has a 1/4" bearing hub press fit into the wheel. The wheels come unassembled, you need to bolt them together. Each wheel set weighs ~8 oz. (4 wheels, 2 drive hubs, 2 bearing hubs).

The tracks can be ordered with a custom length. Since they are molded, a custom length will take up to 6 weeks to complete.

Width: 2"
Length (inside circumference): 28.5" (custom lengths can be selected as an option below)
Pitch of Timing Holes: 0.99"
# of Timing Holes: 29
Wheel Spacing (nominal): 8.25" (3.6" OD Wheels)

Documentation

Track-length-per-pitch chart

Delivery

This item is Built to Order and usually ships in 1-3 Days.
Actual delivery may vary based on workload or if custom length is required, contact us for a more accurate delivery time or if you need it sooner.

Item Options - Customize

Select an option by clicking on its button. To see more details about the option select the option name, selecting 'more details' in the pop-up will take you to that options product page. Default selections (if any) are pre- selected for you. Click on the update button below to see the price with your selected options.

*Included Items

MLT-JR Set of Wheels and Hubs

MLT-JR Molded Track Set - 2 inch Wide x 25mm pitch

*The standard length of these tracks is 29 holes/pitches (725mm total length). If you want a custom length enter the amount of holes/pitches you want your tread to have. This will add 4-8 weeks for shipment. Minimum of 23, maximum of 60 holes/pitches.

Custom Length (Add $79.00) (Add 8 weeks)

*Assembly

Unassembled

Assemble Wheels (Add $17.00)

Item Price

Adjusted Price

$189.00

Support Links

Related Items

MLT-JR Molded Track Set - 2 inch Wide x 25mm pitch

TD-135-002

This is a pair of All Terrain reinforced 2 inch wide tracks for UGVs. They have a mesh reinforcement, molded rubber with no splice. Different lengths can be ordered. This is the same set of treads we use on the MLT treaded robot.

$92.00

Not Available

Configurable - MLT-JR Tracked Robot Platform

TP-220-001

This tracked robot is equipped with 32mm motors. The default configuration has a top speed of 179 ft/min and payload up to 15lbs. With different configurations, speed can range from 71-250 ft/min and payload can range from 3 to 15 lbs.

$642.21

Built to Order
2-5 Days

New Items

NEW Prebuilt MLT-JR Wireless Tracked Development Robot

TP-500-305

This is a MLT-JR tracked programmable robot platform and is equipped with 32mm motors, motor controller, and Arduino. This Arduino robot can be programmed to be a autonomous robot.

$1,288.79

Not Available

4 Inch Omni Wheel and Aluminum Hub Set

TD-312-000

This is a set containing a 4 Inch Omni Wheel and a 6mm Nexus Robot Aluminum Wheel Hub. It is intended for use with our Triangular Omni Wheel Robot. The aluminum hub couples directly to the 6mm IG32 motor shaft.

$40.80

Built to Order
0-1 Days

Description

Features and Specifications

Documentation

Delivery

*Included Items

*The standard length of these tracks is 29 holes/pitches (725mm total length). If you want a custom length enter the amount of holes/pitches you want your tread to have. This will add 4-8 weeks for shipment. Minimum of 23, maximum of 60 holes/pitches.

*Assembly

Robots for Sale

Related Services

Help

Social Networking