IG32, IG42, and IG52 Gear Motor Encoder Pull-up Board

Features and Specifications

  • 0.1" 4-position friction lock header for easy connectivity to a microcontroller.
  • 2mm 4-position right angled header for interfacing with built-in encoder connector on the specified motors.
  • Provides a 1K Ohm pull-up resistor to Vcc for Channel A required for our IG32, IG42, and IG52 Encoder Gear Motors.
  • Provides a 1K Ohm pull-up resistor to Vcc for Channel B required for our IG32, IG42, and IG52 Encoder Gear Motors.
  • 0.1uF filter capacitor between Vcc and Ground.
  • Length: 0.75"
  • Width: 0.50"

Surface mount components are assembled. Headers come loose, so you can decide if you want to wire direct or use headers.

The SDR encoder pull-up board is specifically designed to allow the end user to easily interface with our IG32, IG42 and IG52 motors. It has 1k resistors on channels A and B to pull the signal to Vcc. This is needed to properly interface with the encoders.


IG32, IG42, and IG52 Gear Motor Encoder Pull-up Board

  • $12.58
  • $8.80



Available Options

( Collapse All )
None
$0.00
Soldered, crimped and 1 foot of wire
$8.85

Related Products

IG32 24VDC 191 RPM Gear Motor with Encoder
IG32 24VDC 191 RPM Gear Motor with Encoder

Brushed permanent magnet DC motor Variable speed and reversible Planetary Gear Box Final..

Product Code: TD-054-191

$38.08

IG32P 24VDC 265 RPM Gear Motor with Encoder
IG32P 24VDC 265 RPM Gear Motor with Encoder

Brushed permanent magnet DC motor Variable speed and reversible Planetary Gear Box Final..

Product Code: TD-055-265

$46.55

IG32 24VDC 074 RPM Gear Motor with Encoder
IG32 24VDC 074 RPM Gear Motor with Encoder

Brushed permanent magnet DC motor Variable speed and reversible Planetary Gear Box Final..

Product Code: TD-054-074

$43.57

IG52-04 24VDC 082 RPM Gear Motor with Encoder
IG52-04 24VDC 082 RPM Gear Motor with Encoder

Brushed permanent magnet DC motor Variable speed and reversible Planetary Gear Box Final..

Product Code: TD-045-082

$209.74

Kangaroo x2 motion controller
Kangaroo x2 motion controller

Kangaroo x2 adds self-tuning feedback motion control to your Sabertooth or SyRen motor driver. It ca..

Product Code: TE-180-000

$33.20

Dual LS7366R Quadrature Encoder Buffer
Dual LS7366R Quadrature Encoder Buffer

This is a breakout board based on LS7366R quadrature counter IC. The Dual LS7366R buffer board is de..

Product Code: TE-183-002

$65.26

IG52-04 24VDC 044 RPM Gear Motor with Encoder
IG52-04 24VDC 044 RPM Gear Motor with Encoder

Brushed permanent magnet DC motor Variable speed and reversible Planetary Gear Box Final..

Product Code: TD-045-044

$212.52

Single LS7366R Quadrature Encoder Buffer
Single LS7366R Quadrature Encoder Buffer

This is a breakout board based on LS7366R quadrature counter IC. The single LS7366R buffer board is ..

Product Code: TE-183-001

$40.92