SGT-32P Wireless Tracked Inspection Robot with GoPro - DISCONTINUED
- Remote Inspection - Remotely inspect areas that are not easily accessible to people. Record the video in Full HD on the provided GoPro Hero5 and SD Card using your smartphone to view and control the video.
- Entry into difficult areas - This tracked robot is very quick and has the ability to traverse many obstacles that often stop other robots.
- Crawl Space and Attic Inspection - Compact and lightweight to easily fit into crawl spaces or attics. Video is viewed using WiFi between your smartphone and the GoPro Hero5 or Hero6. A wireless signal must be maintained. Not recommended for pipes, culverts, long distances, etc. where Wi-Fi will not work.
- Dimensions: 12.5"Long X 9.5"Wide X 6.5" High
- Capacity: Handles 5lbs. of additional payload in most terrains
- Speed: Up to 85 fpm
- Weight: The total weight of this robot configuration is ~ 6lbs
- Assembly: Fully assembled, tested, and ready to go!
- RunTime: 2 hours of operation depending on use
The video transmission is from the GoPro to your smartphone device via WiFi. The range and performance can be significantly impacted by the environment, obstructions, shielding, and the performance of your smartphone. We have tested the video and were able to get up to 100 feet in open space with minimal latency. However, this can be significantly less with obstructions, bad/noisy environment, or the performance of your smartphone. The best way to operate the robot is to keep a line of sight between the robot and the remote. If that isn't possible then it is recommended that the transmission distance (distance between the robot and the remote) is kept to a minimum. This may mean walking through the house above the robot or walking alongside the robot on the other side of a wall. There is NOTHING we can do to increase the range of the GoPro (the WiFi is built-in and an FCC compliant device, we CAN NOT change this).
This robot not recommended for underground or long-distance pipe inspection. This is a simple and robust system for inspecting areas you that are difficult to access and/or you don't want to be. We have tested many different systems for crawl space and attic inspection. If you need longer range or underground inspection you will need to use one of our tethered inspection robots.
- Tracked Robot, assembled and tested
- Battery charger
- Remote with smart phone holder (smart phone NOT provided)
- Camera Tilt System for GoPro (-10 degrees to +70 degrees)
- LED Lights mounted on Tilt Bracket
- GoPro Hero5
- 16GB micro SD Card
- Storage/Transport Case: Select if you want the optional pelican case to keep the robot in. The case is foam lined and we cut it out so your robot and remote are securely stored. If this option is not selected, it will be shipped in a cardboard box that is not reusable. We strongly recommend the pelican case, it is a great value and protects the robot during shipping and transport to the job sites, etc.
Documentation and Support
- This item is Discontinued.
- Need it faster? Contact us
This robot has been DISCONTINUED. Click here to visit our new GPK-32 Inspection Robot.
The SGT-32P uses a GoPro which relies on a WiFi connection to show the live video feed. This WiFi connection connects a phone to the camera. Please note that there is some latency in the video stream and the range is very limited. This is most noticeable in non-line-of-sight applications. Obstacles between the remote and the robot will degrade the operating range. This may result in a loss of video feed. The SGT-32P robot is only recommended for use in line-of-sight and within a 100ft.
The robot uses a GoPro Camera mounted with a custom actuated tilt bracket. High power LED lights are fixed to the tilt bracket allowing for good visibility in dark places. With these features, the low profile mobile robot allows for great coverage and the ability to see in detail in difficult to reach areas. All you need for this is your smartphone, everything else is included.
Video can be recorded directly onto an SD card in the camera for full HD viewing. The robot is controlled using a FLYSKY remote and the video is sent back over Wifi to your phone or tablet. Please review the section below on Wireless Operation before purchasing.
The tracked robot is built on an aluminum chassis and uses durable components (UHMW wheels, bronze bearings, etc.). Each track is driven by a planetary gear motor delivering smooth reliable power. The wheels are mounted directly to the motor output shaft and an idler wheel is bolted to the chassis. The tracks are molded 4 ply seamless tracks offering exceptional strength and quality. The motor and track combination allow this robot to go over most terrain, yet its size makes it very maneuverable indoors. The robot uses differential steering (movement is based on two separately driven wheels placed on either side of the robot body. It can thus change its direction by varying the relative rate of rotation of its tracks).
The robot is configured as listed below. If you require customization, please fill out our custom robot request form.