Continuous Rotation
If you'd like a servo with continuous rotation, please see HSR-1425C.
These are the servos used in our Chassis. The servos are made by Hitec. For Details see the datasheet. On all Hitec servos the Black wire is 'ground', the Red wire (center wire) is 'power', and the yellow (third) wire is 'signal'. This servo has a Hitec/JR connector which mates directly with a 0.1" 3-pin header. This servo comes with mounting hardware, servo arms, and rubber mounting grommets.
To mount this servo to a flat surface see our servo hardware kit. We also sell scanner brackets (Single or Dual) to attach to the servos.
HS-422 Servo
- Product Code: TD-009-000
- Availability: Not Available
-
$15.99
Related Products
HS-55 Servo
These are considered Sub-miniature servos The servos are made by Hitec. On all Hitec servos the Blac..
Servo Standoff Mounting Hardware
This is all the necessary hardware to mount a standard servo to a flat surface. It is used to mount ..
HiTec/JR/Airt. Y connector
This is a Y connector. It has a male plug on one end with female pins, then Ys out to two female plu..
HS-645MG Ultra Torque Metal Gear Servo
These are HiTec HS-645MG Ultra Torque Metal Gear Servos for your Heavy Duty needs! The servos are ma..
HS-785 Sail Winch Servo
This HiTec servo is a multi-turn servo winch. Depending on the RC system used, you can get up to 4 f..
HSR-1425CR Continuous Rotation Robot Servo
The HSR-1425CR is an all new Continuous Rotation dual ball bearing servo. If you are looking for a s..
Pololu Micro Maestro 6-Channel USB Servo Controller (Unassembled)
The Micro Maestro is the smallest of Pololu's second-generation USB servo controllers. The Maestros ..
Hitec D-645MW 32-Bit, High Torque, Metal Gear Servo
The D-645MW 32-Bit, High Speed, Metal Gear Servo is part of D-Series dynamo servo line. All Hitec D-..