Features and Specifications
- Scooter battery charger 24V 5A XLR
- Input:110-120V, 50-60Hz.
- Output: 24V 5A, Connector: 3-prong XLR (male) plug.
- Automatic Charger, won't over charge your batteries.
- Standard output XLR three pin male connector.
- Completely automatic.
This Charger is designed for charging a 24V lead acid battery with 5A current. The charger will work with 2 12V batteries run in series.
This is a Brand New 24V 5A smart charger with a standard XLR three pin output connector for 24V Lead-Acid, Sealed Lead Acid (SLA) and GEL rechargeable batteries, which are widely used in electric scooters, power chairs, electric bikes, wheelchairs,etc.
- The charger will automatically monitor battery voltage, adjust output voltage and current, and automatically shut off when batteries are fully charged. Won't damage your batteries.
- Four Protection design:
- Short circuit protection;
- Battery polarity error protection;
- Over current protection;
- Over voltage protection.
- Compatibility List: ActiveCare, Bladez XTR, Currie, Drive Cirrus Plus EC Folding Power Chair, Golden Technologies, GT, IZIP, Jazzy, LASHOUT, Mongoose, Pacesaver, Pride, Rascal (600 series excluded), Schwinn, Shoprider.
- What if my scooter/wheelchair is not on the list? Please check your battery connector. As long as it is round with three small holes (standard XLR connector), this charger will work.
- We typically cut the XLR connector off and install Anderson connectors onto the cable. Please note, in doing this you void any warranty, so please make sure it works before cutting it.
Automatic 24V 5A SLA Battery Charger
- Product Code: TE-404-024
- Availability: 10 In stock