Documentation and Support

This is a regulator board. It tas a terminal strip with a common ground, input, and 9VDC output. Includes 1A fuse, filtering capacitors, and power status LED. Input voltage should be around 10.5VDC-24VDC. These work great as a regulator for our wireless cameras. The board is spaced out on 0.1" or more grid that is easy to solder with no surface mount components. The board is about 1.25" square.

An optional heat sink (as pictured) can be purchased with it too, which is recommended if the load is going to be much greater than 500mA. The heat sink option includes a machine screw and nut to fasten the heat sink. If desired you can get better heat transfer with heat sink compound.

9V Regulator Board Kit

  • Product Code: TE-045-009
  • Availability: 9 In stock
  • $8.32



Available Options


Related Products

Pololu 5V Step-Up/Step-Down Voltage Regulator

Pololu 5V Step-Up/Step-Down Voltage Regulator

The Pololu step-up/step-down voltage regulator S7V7F5 is a switching regulator (also called a switch..

$9.95

Pololu 5V Step-Up Voltage Regulator U3V12F5

Pololu 5V Step-Up Voltage Regulator U3V12F5

These boost (step-up) voltage regulators generate higher output voltages from input voltages as low ..

$7.95

Pololu 3.3V, 600mA Step-Down Voltage Regulator D24V6F3

Pololu 3.3V, 600mA Step-Down Voltage Regulator D24V6F3

These buck (step-down) voltage regulators generate lower output voltages from input voltages as high..

$5.95

Pololu 3.3V Step-Up Voltage Regulator NCP1402

Pololu 3.3V Step-Up Voltage Regulator NCP1402

These tiny boost (step-up) switching regulators are based on the NCP1402 boost regulator IC. Their s..

$4.95

Panel Mount 2.1mm x 5.5mm Power Jack

Panel Mount 2.1mm x 5.5mm Power Jack

Panel Mount for barrel plug 2.1mm x 5.5mm power jack. Assembly has a diameter of 11.60mm and has a ..

$1.69