| |
Description |
|
Item# |
Price |
|
|
12VDC Halogen Light Set
These are Quartz Halogen Projector lights. Great for our ATRs.
More Detail |
|
TE-035-000 |
$21.90
In Stock
|
|
|
|
|
4 inch Tire Wheel Set
This is a pair of Replacement Tires and Wheels for the Tamiya RC series. We use the on our mini ATR Robot Kits.
More Detail |
|
TAM-026-000 |
$22.00
$19.95
In Stock
|
|
|
|
|
5V Regulator Board Kit
This is a regulator board. It has a terminal strip with a common ground, input, and 5V output. Includes fuse, filter, and power LED.
More Detail |
|
TE-045-005 |
$9.90
In Stock
|
|
|
|
|
6.75 inch Tire Wheel Set
This is a pair of Replacement Tires and Wheels for the Tamiya Terra Crusher. We use the on our ATR Robot Kits.
More Detail |
|
TAM-007-000 |
$32.00
$28.25
In Stock
|
|
|
|
|
|
6V Regulator Board Kit
This is a regulator board. It has a terminal strip with a common ground, input, and 6V output. Includes fuse, filter, and power LED.
More Detail |
|
TE-045-006 |
$9.90
In Stock
|
|
|
|
|
Aluminum Box 4 x 2 1/4 x 2 1/4
This is an aluminum enclosure that can house your OOPic II/II+, MD22, or Magnevation motor controller.
More Detail |
|
TE-026-001 |
$6.95
In Stock
|
|
|
|
|
|
Aluminum Box 5 x 2 1/4 x 2 1/4
This is an aluminum enclosure that can house your OOPic II/II+, MD22, or Magnevation motor controller
More Detail |
|
TE-026-002 |
$6.95
In Stock
|
|
|
|
|
|
Aluminum Box 5 x 4 x 3
This is an aluminum enclosure that can house your OOPic II/II+, MD22, Magnevation motor controller, or pair of Magnevation motor controllers.
More Detail |
|
TE-026-003 |
$8.95
In Stock
|
|
|
|
|
ATR and Vectoring Robot Hardware Kit
This is a bundle of hardware used to mount OOPics, MD22s, Magnevation's, etc to the ATR and vectoring robots.
More Detail |
|
TD-021-000 |
$6.95
In Stock
|
|
|
|
|
ATR Idler Wheels for Encoders - 6.75" Dia
These large ATR wheels are 6.75" in diameter. They come as pair since they have directional tread. These come with two bearings to they can be used with encoders on our ATRs.
More Detail |
|
TD-039-002 |
$94.00
In Stock
|
|
|
|
|
ATR Roll Cage
This is a roll cage that can be mounted on your ATR frame.
More Detail |
|
TD-026-000 |
$165.00
In Stock
|
|
|
|
|
ATR Shaft and 4" Wheel Set
This is the shaft and wheel set for our Mini ATR kits.
More Detail |
|
TD-031-000 |
$35.50
In Stock
|
|
|
|
|
ATR Threaded Rod Spacer Support Package
This kit has 4 9" pieces of threaded rod with nuts and washers for spacing out the ATR platforms.
More Detail |
|
TD-025-000 |
$5.95
In Stock
|
|
|
|
|
ATR Welded Aluminum Base for 32mm Motors
This is a rugged chassis made of 1/8" thick aluminum to accept our IG32 and IG32P gear motors. The aluminum is all laser cut for an exact fit-up and then hand welded and polished. The chassis accept outboard bearings to take the wheel loads.
More Detail |
|
TD-037-001 |
$289.00
In Stock
|
|
|
|
|
|
ATR Welded Aluminum Base for 42mm Motors
This is a rugged chassis made of 1/8" thick aluminum to accept our IG32 and IG32P gear motors. The aluminum is all laser cut for an exact fit-up and then hand welded and polished. The chassis accept outboard bearings to take the wheel loads.
More Detail |
|
TD-037-002 |
$319.00
In Stock
|
|
|
|
|
|
ATR Wheel and Shaft Set Pair - 6.75" Dia
These large ATR wheels are 6.75" in diameter. They come as pair since they have directional tread.
More Detail |
|
TD-023-002 |
$74.50
In Stock
|
|
|
|
|
Auto Reset Thermal Overload 10Amp
This item is great for your ATR. It will trip on over current. Once it cools off (a few seconds) it will reset.
More Detail |
|
TE-041-000 |
$3.75
In Stock
|
|
|
|
|
Electric Motor Hookup Kit
This kit provide shielded hookup wire along with capacitors, ferrite rings, and heat shrink
More Detail |
|
TE-024-000 |
$4.50
In Stock
|
|
|
|
|
Electric Power Hookup Kit
This kit includes fuse holders, fuses, wire, switches and more to wire the power to your ATR or vectoring robot kit
More Detail |
|
TE-025-000 |
$17.95
In Stock
|
|
|
|
|
HiTec Aggressor 2-Ch AM 75MHz with Rx and servo
Low cost two channel radio, receiver, and servo ergonomic design.
More Detail |
|
TE-075-000 |
$46.50
In Stock
|
|
|
|
|
HiTec Aggressor CRX 75MHz 3 FM w/ DCS Rx and Servo
This is the 75MHz Hitec Aggressor CRX 3 Channel FM Computer Radio System. This standard version includes a HS-3xx Ball Bearing Servo, DCX 3ch Receiver and Switch harness.
More Detail |
|
TE-077-000 |
$184.50
In Stock
|
|
|
|
|
HiTec Eclipse 7 Channel RC QPCM Tx and Rx
HiTec's best aircraft control system, the Eclipse 7, features 7 channels, 7 model memory and specific programming for helicopters, gliders, and glow, gas or electric, fixed wing aircraft (of course we use it for robotics).
More Detail |
|
TE-068-007 |
$268.00
Out of Stock
|
|
|
|
|
HiTec Laser 4 Channel 75MHz RC Controller Pkg
This is a LASER 4 FM 4 Channel 75MHz Transmitter with Supreme 8 Channel Receiver.
More Detail |
|
TE-033-004 |
$118.95
In Stock
|
|
|
|
|
HiTec Laser 6 Channel 75MHz RC Controller Pkg
This is a LASER 6 FM 6 Channel 75MHz Transmitter with Supreme 8 Channel Receiver.
More Detail |
|
TE-033-006 |
$139.95
In Stock
|
|
|
|
|
HiTec Optic 6 Transmitter package and QPCM Rx
The new value packed Optic 6 FM/Q-PCM six channel computer aircraft radio system is available with power plane, sailplane, Heli programming, and of course Robotics! The new Optic 6 is one of the most flexible six channel systems available.
More Detail |
|
TE-059-006 |
$249.00
In Stock
|
|
|
|
|
HiTec/JR/Airt. 12� male plug single ended
This is a 12� 3-pin lead that has a male plug and female pins on one end and nothing on the other end. Made with quality stranded 3-color wire. Perfect for connecting your RC receiver to a motor speed controller.
More Detail |
|
TE-040-001 |
$1.95
In Stock
|
|
|
|
|
IG32 24VDC 067 RPM Gear Motor
These are heavy duty gear motors for our robot kits or you can use them for your application.
More Detail |
|
TD-014-067 |
$20.50
In Stock
|
|
|
|
|
|
IG32 24VDC 195 RPM Gear Motor
These are heavy duty gear motors for our robot kits or you can use them for your application.
More Detail |
|
TD-014-195 |
$17.95
In Stock
|
|
|
|
|
IG32 Standard Gear Motor Housing for TD-014 and 15
This is a standard gear motor housing. It is sized to go with our small and medium IG32 gear motors.
More Detail |
|
TD-017-000 |
$47.00
In Stock
|
|
|
|
|
IG32P 24VDC 190 RPM Gear Motor
These are heavy duty gear motors for our robot kits or you can use them for your application.
More Detail |
|
TD-015-190 |
$21.95
In Stock
|
|
|
|
