Our USB to TTL converter provides two way serial communications signal conversion between the TTL (Transistor Transistor Logic) input/output (from an OOPic or other PIC) to and from a personal computer via virtual COM port. More Detail
Single Scanner Servo Arm Bracket
This Bracket is to mount a Sharp GP2D12 IR detector or a Devantech SRF04 Ultrasonic ranger to a standard servo arm. The servo arm is not provided More Detail
TS-015-000
$4.50
In Stock
Dual Scanner Servo Arm Bracket
This Bracket is to mount a Sharp GP2D12 IR detector and a Devantech SRF04 Ultrasonic ranger to a standard servo arm. The servo arm is not provided. More Detail
TS-016-000
$5.50
In Stock
Trekker Line Following Bracket
This bracket will hold 1 to 4 photo reflectors for sensors. Black and white contrast on the floor will be read by the sensors which will tell the OOPic or other microcontroller how to maneuver the robot. More Detail
TS-026-000
$8.95
In Stock
Trekker Wheel Encoder Brackets
These are two brackets that can mount to the bottom of the Trekker to hold photo reflectors. Black and white contrast disks are included that can be read by sensors to allow the microcontroller calculate how far the robot has traveled. More Detail
TS-027-000
$16.95
In Stock
UVTRON Standard Bracket
This bracket holds the Hamamatsu UVTron Flame Detector Kit. It will mount to either the Single Scanner Servo Arm Bracket a Dual Scanner Servo Arm Bracket. More Detail
TS-028-000
$12.95
In Stock
UVTRON Standard Line of Site Mask
This is a simple mask the goes over the sensor on the Hamamatsu UVTron Flame Detector Kit. The piece is made from wood with a hole machined into it and slot milled through to the hole. More Detail
TS-029-000
$6.95
In Stock
UVTRON Deluxe Bracket and Line of Site Mask
This bracket/housing has two roles. It provides a mounting pad and hardware for the Hamamatsu UVTron Flame Detector Kit and it also provides a mask to limit the field of view of the sensor. More Detail
TS-030-000
$29.95
In Stock
Electronic Compass Bracket and Mast
This is a bracket to mount your electronic compass on and keep it away from any metal. The bracket is made from laser cut acrylic and it mounts to a nylon mast. More Detail
Copyright � 2001-2006 SuperDroid Robots Inc. SuperDroid Robots Inc. is incorporated in Wake County, NC USA SuperDroid Robots also does business as Team Half-Life SuperDroid Robots is a registered trademark of Team Half-Life. Prior to purchasing review our Terms
