Description

This a prebuilt robot assembled from the SST2 Tracked Robot. The robot is being sold in the configuration listed below. The prebuilt robot is fully assembled, tested and is ready to run. For a customized configuration please follow the preceding link and select the options you desire on the bottom of the item page. If further customization is required, please fill out our Custom Robot Request Form.

The SST is designed and fabricated in North Carolina USA and fully supported by SuperDroid Robots, an industry leader in robotics. It is a smaller version of our LT2 and HD2 tanks, but built with the same high level of quality, strength, power, etc. This is not a plastic imported robot that will disappoint you. It performs exceptionally well for its size and is intended as a small maneuverable customizable tracked robot platform.

The robot comes with a welded aluminum chassis, wheels hubs and tracks. Each track is driven by a planetary gear motor delivering smooth reliable power. The sprocket wheels are mounted directly to the motor output shaft and an idler wheel is bolted to the chassis. The tracks are molded 4 ply seamless tracks offering exceptional strength and quality. The motor and track combination allow this robot to go over most terrain, yet its size makes it very maneuverable indoors. The robot uses differential steering (movement is based on two separately driven wheels placed on either side of the robot body. It can thus change its direction by varying the relative rate of rotation of its tracks).

Specifications

• Dimensions (LxWxH): 9.25" x 6.25" x 3"
• Weight: 3lbs.
• Speed: Under .5mph (~ 40 feet per minute)
• Operation Time: Approximately 1 hour.
• Payload Capacity: Up to 5lbs.
• Axle Mount: Direct Mount (DM)

Prebuilt Configuration

• Robot comes preassembled, tested, and ready to run.
• Includes robot, remote control, and charger.
• Motors: Two (2) IG32 12VDC 053 RPM Gear Motors.
• Tracks: One (1) SST Tracks and Wheels Set.
• Battery: One (1) LiPo Battery 11.1V 2200 mAh (LiPo batteries do not have low voltage protection circuits. Consult LiPo product page for important information).
• Motor Controller: One (1) Sabertooth Dual 5A Motor Driver.
• Controller: One (1) FLYSKY FS-i6 6-channel Transmitter and Receiver

Documentation and Support

• Click here to view a CAD drawing of this robot.
• Click here to view a typical schematic for the SST2 using RC control.

Delivery

• This item will be shipped immediately since it is already built. We will charge up the batteries and have it ready to go out of the box for you.
• Need it faster? Contact us

Video