These specifications are listed with the "rated" values (these are the values where the motor runs at peak efficiency). The motors can deliver considerably more than their rated values, refer to datasheet for more information.
For conversion of the torque values, follow this link
We recommend controlling the motors with one of our motor speed controllers. See our motor controller support page for more information. We also recommend you use our wiring kit to wire your motors. The hookup kit will help suppress the electronic noise generated from any DC motor. See our motor wiring support page for more information.
This is a large gear motor housing. It is sized to go with our large IG42 gear motors.
This kit provide shielded hookup wire along with capacitors, ferrite rings, and heat shrink
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board measures only 0.7″ × 0.8″, but it allows a typical continuous output current of up to 5 A.
DIP breakout board for SOT23 packages. This will work with MOSFETs, Transistors, Voltage Regulators, etc.
Pins are 0.1" spaced for breadboard applications.