Kangaroo x2 motion controller

Applications

  • Adding position and speed control to supported Dimension Engineering motor controllers

Features and Specifications

  • Supported Inputs: Quadrature encoders, potentiometer, limit switches and mechanical stops
  • Inputs Modes: Analog, R/C and serial inputs
  • 2 channel self-tuning PID controller
  • Position or speed control
  • Compatibility:
    • Sabertooth 2x10
    • Sabertooth 2x12
    • Sabertooth 2x25
    • Sabertooth 2x25 V2
    • Sabertooth 2x50HV
    • Sabertooth 2x60
    • SyRen 10
    • SyRen 25
    • SyRen 50

Available Options

(Selected Below)
  • The DElink2 USB Link allows the end user to interface with the motor controller directly using Dimension Engineering's DEScribe software.
  • Servo pigtails make connecting the motor controller to an R/C receiver quick and easy.

Kangaroo x2 adds self-tuning feedback motion control to your Sabertooth or SyRen motor driver. It can be used with quadrature encoders or potentiometers to provide position or speed control. It supports one or two feedback channels.

Feedback control has always been highly desirable for mechanical systems. Being able to tell your device to move an exact amount, at a specific speed or to a certain position, and have it reliably and repeatably do so, regardless of the load or disturbances, has obvious benefits. However, PID and other controllers have to be carefully tuned to get acceptable results. Feedback tuning is difficult, time consuming and requires advanced math and physics knowledge.

Kangaroo x2 is the first self-tuning controller in its class. Instead of requiring you to measure, model and calculate the system, the controller itself will figure everything out after a few switch settings and button presses. In the time it takes to get a tasty snack, you can come back to a perfectly tuned system ready to accept your commands.

Instead of requiring you to use a microcontroller to do closed loop control, Kangaroo x2 works from analog and radio control sources as well as microcontrollers and computers. You can, for example, use it to build that two horsepower R/C servo you’ve always needed as the final piece of your doomsday device. Just remember who helped when the vaporizing starts.

During operation, you can command speeds, positions or combined commands like “move to 37 inches at a speed of 4 inches per second.” You can also have the Kangaroo x2 report back speeds and positions while it is running. A mixed mode allows for unstoppable mobile robots with differential drive or tank style steering.

If you need to get your product under control, Kangaroo x2 is the best way to do it.


Kangaroo x2 motion controller

This product is unavailable.

Contact us if you have any questions.

Available Options

( Collapse All )

Related Products

Sabertooth Dual 25A Motor Driver
Sabertooth Dual 25A Motor Driver

The Sabertooth 2X25 is one of the most versatile, efficient and easy to use dual motor drivers on th..

Product Code: TE-091-225

$171.00

Sabertooth Dual 12A Motor Driver
Sabertooth Dual 12A Motor Driver

This is the new version of the Sabertooth 2x10 motor controller. It has replaced TE-091-210. The ..

Product Code: TE-091-212

$104.50

Sabertooth Dual 60A motor driver
Sabertooth Dual 60A motor driver

The Sabertooth 2X60 is one of the most versatile, efficient and easy to use dual motor drivers on th..

Product Code: TE-091-260

$250.00

IG32, IG42, and IG52 Gear Motor Encoder Pull-up Board
IG32, IG42, and IG52 Gear Motor Encoder Pull-up Board

The SDR encoder pull-up board is specifically designed to allow the end user to easily interface wit..

Product Code: TE-179-000

$8.80 $12.58

DELink 2 USB link
DELink 2 USB link

The DELink2 is the perfect compliment to Dimension Engineering’s Sabertooth motor controllers and Ka..

Product Code: TE-211-000

$27.20

Sabertooth Dual 32A Motor Driver
Sabertooth Dual 32A Motor Driver

The Sabertooth 2x32 is a dual channel motor driver capable of supplying 32 amps to two motors, with ..

Product Code: TE-091-232

$170.40