Categories
Features and Specifications
- Choose between the TP-Link 300Mbps Wireless Router or ASUS 3-In-1 Wireless Router. For help deciding on the ethernet bridge or router, see our support page.
- Arduino Mega 2560 R3 (Qty 1)
- Raspberry Pi 4 Model B (Qty 1)
- SDR Custom Arduino Mega Shield (Qty 1) to connect peripherals with ease without interfering with any attached shield.
- Includes:
- 2 UART headers
- 1 I2C Header
- 15 Digital I/O with accompanying 5V and ground pins
- 16 Analog Inputs, two with voltage dividers and 14 with accompanying 5V and Ground pins
- 4 Status LEDs
- Reset button
- Pass through headers for ICSP
-
Voltage Regulators (Qty 3). This provides power to:
- Control Board and 4x TTL Relay Board - 5V
- Router or Bridge 12V
- Additional adjustable regulator for use with servos, motors, etc
- 8 Pos 2 Row Barrier Terminal Strip (Qty 1)
- 8 Position Jumper Terminal (Qty 1)
- 4x TTL Relay Board (Qty 1)
- Logitech Gamepad Controller (Qty 1)
- Ethernet patch cables (Qty 2)
- SuperDroid Robots customized source code to allow basic operation of motors, sensors, status LEDs and Ethernet communication
- Web-based interface to allow control from a variety of devices
- All the necessary network cables, antenna cables/extensions, terminal blocks, fuses, wiring, mounting hardware, etc.
- Fully configured, wired and tested.
Delivery
- This item is ##AVAILABILITY##.
- Due to the size of this item, freight shipping is typically required. We will contact you after checkout with freight costs and arrangements.
- Need it faster? Contact us
Categories
- Product Code:
- Availability:
$0.00
Available Options
( Collapse All )- Logitech USB GamePad Controller
- Arduino Mega 2560 R3
- 4 Relay, 7 Channel High Current TTL Driver Module
- 8 Pos 2 Row Barrier Terminal Strip with Buss Strip
- Raspberry Pi 4 Model B 4GB - NFS
- 25W Adjustable Switching Regulator Board Kit
- SDR Custom Arduino Mega Shield
- Straight 2.1mm Power Plug with 6ft of wire
- 30 Amp Connector Set
- 3AG Barrel Fuse Holder - Panel Mount - DISCONTINUED
- 5V 25 Watt DC-DC Converter
- 12V 60 Watt DC-DC Converter
- ATC Fuse Holder 14 Gauge
Video Server
$169.00
No video feed
$0.00
RC (Rev=1mS, Off=1.5mS, Fwd=2mS)
$0.00
PWM (0=off, 255=full Speed) with Direction Bit I/O
$0.00
PWM (0=Rev, 127=Off, 255=Fwd) no Direction I/O
$0.00
Analog (0V=Off, 5V=Full) with Direction Bit I/O
$0.00
Analog (0V=Rev, 2.5V=Off, 5V=Fwd) no Direction I/O
$0.00
Serial Mode for use with a Sabertooth/RoboteQ
$0.00
Other (specify below)
$0.00
