Smart Charger for 12V LiFePO4 Battery Packs, 4A

Only charge LiFePO4 battery pack with capacity > 2000 mAh. Don't use the charger for lower capacity LiFePO4 battery pack.
Only charge LiFePO4 battery pack with voltage 12V (4 cell pack). Don't use the charger for Lower voltage battery pack which may cause battery to explode
We are not responsible for any damage caused by misuse.
Must read before place an order.
We reserve the right to not sell the battery to any one if we feel they cannot handle battery safely
For safety warning please see the link here

This Smart Charger is designed for rapidly charging capacity > 4Ah 12V(4 Cells) LiFePO4 batteries.
It features a three stages charging method ( Constant Current, Constant Voltage , Trickle charge mode) without overcharging the battery.
Alligator Clips are installed in output terminal with ~3' 8" of cable (red clip is positive)
"Internal Resettable fuse" is installed inside a charger. No need to change the fuse after over-load current cut-off
INPUT
- AC input voltage 90 to 240 VAC Worldwide power support
- Input frequency 50/60Hz
- Input Current Max 1A
CHARGE
- The Battery range is between 3AH to 25AH
- Max. charging current: 4A
- No Reverse Polarity Protection
  - Must connect to battery with correct polarity. We won't be responsible for any damage caused by miss-use
OUTPUTS
- 12V 4A
LED indicator
- Red LED = Charging (0-99%)
- Green LED = Fully charged (100%)
Box dimensions: 8.5" x 4" x 3"
Charger dimensions: 2 3/8" x 5 1/2" x 1 3/8"
Weight: 320grams ( 11.2 Oz)