The image gallery displays robots built using this platform.

If assembly is chosen as an option below, this item will not qualify for free shipping.

Description

This is a configurable robot kit with selectable options at the bottom of the page. The options are pre-selected to reflect our recommended configuration but can be changed to suit your needs.

These All Terrain Robots (ATRs) are designed and fabricated in North Carolina USA and fully supported by SuperDroid Robots, an industry leader in robotics. The enclosed chassis is a rigid gusseted aluminum frame that is precisely fabricated using state of the art CNC equipment. The wheels are mounted on solid steel axles which are supported by ball bearings. Each axle/wheel is driven by a planetary gear motor delivering smooth reliable power. The robot uses differential steering (movement is based on two separately driven wheels placed on either side of the robot body. It can thus change its direction by varying the relative rate of rotation of its wheels). See our ATR page for more details about our All Terrain Robots. If you need this robot customized beyond the provided options below, Contact us .

Specifications and Configuration

Specifications

These specifications are based on the Standard Configuration listed below. These values may change based on the options selected.

• Dimensions (LxWxH): 28.0" x 22.0" x 11.0"
• Weight: 42 pounds
• Axle Mount: Single Bearing (SB) - Axles are mounted directly onto the motor shaft and supported by a single bearing
• Drive Method: Direct Drive
• Speed and Payload Chart: 4WD IG42-SB Robots
• Payload:
  • With default selected options: 20 to 35 pounds depending on use
  • Payload range with available options: 10 to 80 pounds
• Speed:
  • With default selected options: 319 feet per minute (3.6 mph)
  • Top speed range with available options: 123 to 628 feet per minute

Standard Configuration

This is our recommended configuration and includes everything listed below. This configuration includes everything needed to make it run! Other options, including assembly, are detailed in the Available Options section.

• The standard configuration comes unassembled.
• Includes the chassis, hardware, and wiring kits.
• Gear Motors: Four (4) IG42 122 RPM Gear Motors (one per axle/wheel).
• Wheels: Two (2) pair of 10 inch pneumatic wheels.
• Battery System: Two (2) Interstate 12V 8 Ah Lead Acid Battery providing 1-3 hours of operation depending on use.
• Motor Controller(s): One (1) Sabertooth Dual 12A Motor Driver.
• Control System: One (1) FLYSKY FS-i6 2.4Ghz 6Ch transmitter and receiver.

Available Options

While we recommend the standard configuration, if you would like to customize your robot we offer many options you can choose from at the bottom of the page. The TP-140-042 kit allows for a wide range of customizations based on your needs. We offer a variety of motor controllers, batteries, RC controllers, and encoders so you can configure the robot to meet your requirements. The weight of the robot will vary depending on how the robot is configured (batteries are the main cause of this). You can find detailed specs such as weight and dimensions by clicking on the component and viewing its product page. For help selecting components, read the information below.

• Wheels: Choose from our selection of wheels. You can choose from our standard grip pneumatic tires or if more traction is required you can choose our rugged all terrain traction lug tires.
• Gear Motors: Choose from our selection of different RPM gear motors. As you go down in RPM, your payload capacity will go up but your speed will go down. As you go up in RPM, your payload capacity will go down but your speed will go up.
• Batteries: We offer a few different battery options but there are two types of batteries that we recommend using with this kit: Lead Acid and LiFePO₄. The lead acid batteries are much less expensive but are heavier, do not provide any internal circuit protection, and can survive anywhere from about 200-1000 charge cycles. The LiFePO₄ batteries are more expensive but are much lighter, have internal circuit breakers to prevent damaging themselves, and can survive about 1000-3000 charge cycles. The charge cycle estimates are based on the recommended depth of discharge for each battery cycle. A lead acid battery is only recommended to be discharged to about 50% of it's capacity while a LiFePO₄ battery can be discharged to 100% with no long term affects.
• Motor Controllers: Choose from our selection of RoboteQ, Sabertooth, and RoboClaw motor controllers. In most configurations, a single motor controller is all that is required. The left side motors share a channel while the right side motors share the other channel. We offer the option to double the quantity in case you require encoders on all four motors.
• Encoders: This robot can be configured with encoders used for odometry and/or speed control. They are very useful if you are planning on making your robot autonomous or semi-autonomous. For encoders, select motors with encoders and the appropriate motor controller and encoder hookup. Linked below in the documentation and support section are some resources that help in selecting encoder options.
• RC Controllers: We offer several options for controlling your platform. If you are planning on using this robot with a microcontroller, Wi-Fi control package, or similar device an RC controller is not necessary.
• WiFi Control Package: We offer an option to control your robot with a WiFi package. If you wish to have encoder feedback, there is an option for WiFi Package with encoder input.
• Optional Accessories: You can customize your robot to have an bumpers and/or a roll cage. If you would like both front and back bumpers please select both.
• Paint: You can choose to have this robot painted if you would like. Our standard is black bedliner but we offer customized painting options as well.
• Assembly: You can choose if you'd like our team to assemble the kit prior to delivery. If you have selected encoders and want assembly you must select the assembly with encoders. The in-house assembly will typically add a week to the delivery time.

Documentation and Support

• Click here to view a CAD drawing of this robot (Pg. 1 - 10in wheels, Pg. 2- 6in wheels).
• Click here to view a CAD drawing of the chassis.
• Assembly Manual
• How to Build a Robot - Support and Videos
• Choosing encoder options for Robot Kits
• RoboteQ XDC2460 controller: Speed controller with encoder input
• Encoder CPR
• Encoder Support Overview

Delivery

• This item is Built to Order and usually ships in 3-7 Days.
• Assembly will add approximately 1 week.
• Need it faster? Contact us

Video

The videos below demonstrates how the ATR performs in a variety of situations. The video is of our enclosed WiFi ATR, which is the same chassis, just configured for WiFi control.