|
�
| Click on images for larger views |
|
|
� |
� |
| Gear Motor |
Dimensions |
Torque/Current Curves |
�
These gear motors are made with steel gears (not plastic or sintered metal).� They run great and we've tested them extensively on our All-Terrain-Robots and Vectoring Robots.� We sampled many other manufactures and the gears would strip or the windings would burn up, we had no failures with these.
�
The table below lists its characteristics.� The images above show current and torque curves and dimensions.� These motors have a stall torque of about 75 kgf-cm!� They utilize a 1:24 gear reduction.� The gear motor is 24VDC.
�
| Reduction Ratio |
Rated Torque |
Rated Speed |
Rated Current |
No Load Speed |
No Load Current |
| � |
kgf-cm |
rpm |
mA |
rpm |
mA |
| 1:24 |
10 |
252 |
<2300mA |
290 |
<650mA |
�
|
