Features and Specifications
- Size: 24 x 10 x 12 mm
- Weight: 0.34 oz
- Shaft diameter: 3 mm
- Gear ratio: 50: 1
- Free-run speed @ 6V: 630 rpm
- Free-run current @ 6V: 100 mA
- Stall current @ 6V: 1600 mA
- Stall torque @ 6V: 15 oz.in
- Extended motor shaft?: N
The gearbox has a long (0.365" or 9.27 mm), 3 mm-diameter D- shaped metal output shaft, and the brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch). It weighs approximately 0.35 oz (10 g). Versions with the extended motor shaft have a 1mm diameter round shaft that protrudes 4.5 mm from the rear of the motor, between the two motor terminals; this is not pictured in the above dimension diagram.
These tiny brushed DC gearmotors are intended for use at 6 V, though in general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 - 9 V range (rotation can start at voltages as low as 0.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. The Micro Metal Gear Motor HP w/ 75:1 gear ratio and Micro Metal Gear Motor HP w/ 100:1 gear ratio are also available.
| Micro Metal Gearmotor Table | |||||
|---|---|---|---|---|---|
| Micro Metal Gearmotor |
Speed @ 6V |
Top Zumo Speed @ 6V |
Stall Torque @ 6V |
Stall Current @ 6V |
|
| 100:1 HP | 320 RPM | 25 in/s | (65 cm/s) | 30 oz.in | 1600 mA |
| 75:1 HP | 400 RPM | 32 in/s | (80 cm/s) | 22 oz.in | 1600 mA |
| 50:1 HP | 625 RPM | 50 in/s | (130 cm/s) | 15 oz.in | 1600 mA |
Micro Metal Gear Motor HP w/ 50 to 1 gear ratio
- Product Code: TD-100-050
- Availability: Not Available
-
$15.95
Related Products
Micro Metal Gear Motor HP w/ 75 to 1 gear ratio
These tiny brushed DC gearmotors are intended for use at 6 V, though in general, these kinds of moto..
Micro Metal Gearmotor HP w/ 100 to 1 gear ratio
These tiny brushed DC gearmotors are intended for use at 6 V, though in general, these kinds of moto..
Pololu Zumo Chassis Kit (No Motors)
The Pololu Zumo chassis kit contains the components necessary to build a small, high-performance tra..
Pololu Zumo Robot Kit for Arduino
This combination deal contains most of the parts you need to build an Arduino-controlled Zumo robot...
Pololu DRV8833 Dual Motor Driver Carrier
Texas Instruments' DRV8833 is a dual H-bridge motor driver IC that can be used for bidirectional con..
Pololu Micro Metal Gearmotor Bracket Pair - Black
These plastic mounting brackets allow you to easily and securely mount the ubiquitous 10 mm x 12 mm ..
Pololu Micro Metal Gearmotor Bracket Pair - White
These plastic mounting brackets allow you to easily and securely mount the ubiquitous 10 mm x 12 mm ..
Optical Encoder Pair Kit for Micro Metal Gearmotors, 3.3V - ON SALE
Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with t..
Optical Encoder Pair Kit for Micro Metal Gearmotors, 5V - ON SALE
Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with t..