Micro Metal Gearmotor HP w/ 100 to 1 gear ratio

Features and Specifications

  • Size: 24 x 10 x 12 mm
  • Weight: 0.34 oz
  • Shaft diameter: 3 mm
  • Gear ratio: 100:1
  • Free-run speed @ 6V: 320 rpm
  • Free-run current @ 6V: 80mA
  • Stall current @ 6V: 1600 mA
  • Stall torque @ 6V: 30 oz.in
  • Extended motor shaft: No

The gearbox has a long (0.365" or 9.27 mm), 3 mm-diameter D- shaped metal output shaft, and the brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch). It weighs approximately 0.35 oz (10 g). Versions with the extended motor shaft have a 1mm diameter round shaft that protrudes 4.5 mm from the rear of the motor, between the two motor terminals; this is not pictured in the above dimension diagram.

These tiny brushed DC gearmotors are intended for use at 6 V, though in general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 - 9 V range (rotation can start at voltages as low as 0.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. The Micro Metal Gear Motor HP w/ 50:1 gear ratio and Micro Metal Gear Motor HP w/ 75:1 gear ratio are also available.

Micro Metal Gearmotor Table
Micro Metal
Gearmotor
Speed
@ 6V
Top Zumo Speed
@ 6V
Stall Torque
@ 6V
Stall Current
@ 6V
100:1 HP 320 RPM 25 in/s (65 cm/s) 30 oz.in 1600 mA
75:1 HP 400 RPM 32 in/s (80 cm/s) 22 oz.in 1600 mA
50:1 HP 625 RPM 50 in/s (130 cm/s) 15 oz.in 1600 mA

Micro Metal Gearmotor HP w/ 100 to 1 gear ratio

  • Product Code: TD-100-100
  • Brand: Pololu
  • MPN: 1101
  • Availability: 19 In stock
  • $17.74



Related Products

Micro Metal Gear Motor HP w/ 75 to 1 gear ratio
Micro Metal Gear Motor HP w/ 75 to 1 gear ratio

These tiny brushed DC gearmotors are intended for use at 6 V, though in general, these kinds of moto..

Product Code: TD-100-075

$17.74

Micro Metal Gear Motor HP w/ 50 to 1 gear ratio
Micro Metal Gear Motor HP w/ 50 to 1 gear ratio

These tiny brushed DC gearmotors are intended for use at 6 V, though in general, these kinds of moto..

Product Code: TD-100-050

$17.74

Pololu Zumo Chassis Kit (No Motors)
Pololu Zumo Chassis Kit (No Motors)

The Pololu Zumo chassis kit contains the components necessary to build a small, high-performance tra..

Product Code: TD-095-000

$22.14

Pololu Zumo Robot Kit for Arduino
Pololu Zumo Robot Kit for Arduino

This combination deal contains most of the parts you need to build an Arduino-controlled Zumo robot...

Product Code: TP-350-000

$47.44

Pololu Micro Metal Gearmotor Bracket Pair - Black
Pololu Micro Metal Gearmotor Bracket Pair - Black

These plastic mounting brackets allow you to easily and securely mount the ubiquitous 10 mm x 12 mm ..

Product Code: TD-103-000

$5.70

Pololu Micro Metal Gearmotor Bracket Pair - White
Pololu Micro Metal Gearmotor Bracket Pair - White

These plastic mounting brackets allow you to easily and securely mount the ubiquitous 10 mm x 12 mm ..

Product Code: TD-103-001

$5.68

Optical Encoder Pair Kit for Micro Metal Gearmotors, 3.3V - ON SALE
Optical Encoder Pair Kit for Micro Metal Gearmotors, 3.3V - ON SALE

Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with t..

Product Code: TE-198-000

$4.50 $10.04

Optical Encoder Pair Kit for Micro Metal Gearmotors, 5V - ON SALE
Optical Encoder Pair Kit for Micro Metal Gearmotors, 5V - ON SALE

Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with t..

Product Code: TE-199-000

$4.50 $10.04