Analog output is only available in 10-bit resolution. The analog output voltage is ratiometric to the power supply voltage and will typically swing within 15 millivolts of the power supply rails with no output load. This non-linearity near the rails increases with increasing output loads. For this reason, the output load impedance should be ≥ 4.7kΩ and less than 100pF. The graphs below show the typical output levels for various output loads when powered by a 5V supply.
This is a kit that comes with one encoder and one encoder cable.
This is the Analog 10-Bit, 1/4" Dia Shaft, No Torque.
The MA3 is a miniature rotary absolute shaft encoder that reports the shaft position over 360° with no stops or gaps.Analog output provides an analog voltage that is proportional to the absolute shaft position.
|2||Analog / PWM||Blue|
Miniature Absolute Magnetic Shaft Encoder
- Product Code: TE-289-000
- Availability: 11 In stock