| |
Description |
|
Item# |
Price |
|
2AG 1Amp Fast Acting Fuses
The fuses are small and may be hard to find at you local Radio Shack's. This is a package of 1A fuses. These fuses are used in our Trekker Expansion Boards
More Detail |
|
TE-009-001 |
$2.49
In Stock
|
|
|
|
|
|
Trekker Large Caster Foam Wheel Set
Optional Foam Caster wheels and hardware for the SuperDroid Trekker.
More Detail |
|
TD-005-000 |
$5.25
In Stock
|
|
|
|
|
UVTRON Standard Line of Site Mask
This is a simple mask the goes over the sensor on the Hamamatsu UVTron Flame Detector Kit. The piece is made from wood with a hole machined into it and slot milled through to the hole.
More Detail |
|
TS-029-000 |
$6.95
In Stock
|
|
|
|
|
Trekker OOPic II/II+ Hardware Package
This is the hardware package for assembling the Trekker Chassis and mounting the OOPic-II/II+. If you purchase the Trekker Chassis, 1 hardware package comes with it. This is for additional hardware or changing OOPic Types.
More Detail |
|
TD-012-001 |
$7.95
In Stock
|
|
|
|
|
Trekker OOPic R Hardware Package
This is the hardware package for assembling the Trekker Chassis and mounting the OOPic-R. If you purchase the Trekker Chassis, 1 hardware package comes with it. This is for additional hardware or changing OOPic Types.
More Detail |
|
TD-012-002 |
$7.95
In Stock
|
|
|
|
|
Trekker Omni Caster Wheel Set
These omni wheels can be used on the rear casters. They look work well on all surfaces. They are modified to fit the Trekker Chassis casters.
More Detail |
|
TD-003-000 |
$8.75
In Stock
|
|
|
|
|
Trekker Line Following Bracket
This bracket will hold 1 to 4 photo reflectors for sensors. Black and white contrast on the floor will be read by the sensors which will tell the OOPic or other microcontroller how to maneuver the robot.
More Detail |
|
TS-026-000 |
$8.95
In Stock
|
|
|
|
|
3.5 inch Foam Wheel Set for Servos
The wheels are 3.5" in diameter and about 7/8" thick. They are modified to fit a splined servo shaft such as the HiTec standard servos.
More Detail |
|
TD-006-000 |
$11.95
In Stock
|
|
|
|
|
Trekker Development Board Package
The development expansion package is simply a breadboard that mounts directly to the SuperDroid Trekker Chassis. Great for prototyping your own circuits
More Detail |
|
TE-003-000 |
$11.95
In Stock
|
|
|
|
|
Trekker OOPic-R Electronics Kit
This package is a breadboard that mounts directly to the SuperDroid Trekker Chassis or prototyping along with the basic electronic components to interface the Trekker to the OOPic-R. Includes CD
More Detail |
|
TE-005-000 |
$11.95
In Stock
|
|
|
|
|
Fire Fighting Fan
This is a very powerful 7.2V Speed 400 Electric Airplane motor with a 5" propeller that pushes on the motor. A capacitor to put across the motor leads is also included.
More Detail |
|
TD-010-000 |
$12.95
In Stock
|
|
|
|
|
UVTRON Standard Bracket
This bracket holds the Hamamatsu UVTron Flame Detector Kit. It will mount to either the Single Scanner Servo Arm Bracket a Dual Scanner Servo Arm Bracket.
More Detail |
|
TS-028-000 |
$12.95
In Stock
|
|
|
|
|
Trekker Top Single Sweeping Scanner Bracket Kit
This Bracket is to be used to house any of the SuperDroid Trekker sweeping scanners and mounts to the top of the Trekker chassis.
More Detail |
|
TS-003-000 |
$13.50
In Stock
|
|
|
|
|
Trekker Top Dual Sweeping Scanner Bracket Kit
This Bracket is to be used to house any two of the SuperDroid Trekker sweeping scanners and mounts to the top of the Trekker chassis.
More Detail |
|
TS-004-000 |
$14.50
In Stock
|
|
|
|
|
Trekker Single Fwd Sweeping Scanner Bracket Kit
This Bracket is to be used to house any of the SuperDroid Trekker sweeping scanners and mounts the front of the Trekker chassis.
More Detail |
|
TS-001-000 |
$16.50
In Stock
|
|
|
|
|
Trekker Wheel Encoder Brackets
These are two brackets that can mount to the bottom of the Trekker to hold photo reflectors. Black and white contrast disks are included that can be read by sensors to allow the microcontroller calculate how far the robot has traveled.
More Detail |
|
TS-027-000 |
$16.95
In Stock
|
|
|
|
|
Trekker IR Scanner Package
The IR detector is a Sharp GP2D12 IR detector that mounts too many locations on the SuperDroid Trekker. The sender mounts to the rear or front of the Trekker chassis, front scanner brackets, or bumper switches.
More Detail |
|
TS-008-000 |
$17.90
In Stock
|
|
|
|
|
4.5 inch Foam Wheel Set for Servos Set
The wheels are 4.5" in diameter and about 1 1/8" thick. These wheels are modified to fit a splined servo shaft such as the HiTec standard servos.
More Detail |
|
TD-007-000 |
$18.95
In Stock
|
|
|
|
|
Trekker Soccer Ball Catching Sensor and Brackets
This kit includes two brackets that mount to the Trekker Bumper and act as a catcher for balls. It includes a sensor and the connectors to determine if the Trekker has caught the ball. This kit will only plug into V2.x OOPic II Expansion Boards.
More Detail |
|
TS-022-000 |
$19.95
In Stock
|
|
|
|
|
Trekker OOPic Printed Manual
The Trekker printed manual includes all the information for installing and running the OOPic Driven SuperDroid Trekker. This is the same manual included with the software disk, its just printed in color and bound for easier reference.
More Detail |
|
TM-001-000 |
$21.95
In Stock
|
|
|
|
|
Trekker Wheel Encoder Package (2 Sensors)
This package includes all you need to measure each of the Trekker's wheels as they rotate. The kit includes the wires, plugs, brackets, two sensors, and stickers to put on the wheels. This kit will only plug into V2.x OOPic II Expansion Boards.
More Detail |
|
TS-036-002 |
$24.95
In Stock
|
|
|
|
|
NiMH Batteries and Charger Kit
The NiMH batteries offer a solution to replacing batteries, and they don�t have the memory issues NiCad's have. They are very powerful at 2300 mAhrs! It includes a charger with a plug end that connects to the Trekker OOPic Expansion Cards.
More Detail |
|
TE-008-000 |
$24.95
In Stock
|
|
|
|
|
Trekker OOPIC II Electronics Kit
This package is a breadboard that mounts directly to the SuperDroid Trekker Chassis or prototyping along with the basic electronic components to interface the Trekker to the OOPic-II . Includes CD
More Detail |
|
TE-002-000 |
$25.00
In Stock
|
|
|
|
|
Trekker Enhanced Wheels
These wheels are larger drive wheels allowing the trekker to drive faster and add to the Trekker's appearance.
More Detail |
|
TD-002-000 |
$26.95
In Stock
|
|
|
|
|
Trekker Line Following Kit with 4 sensors
This Kit includes for sensors, bracket, hardware, and electrical connectors so the Trekker can follow lines. This kit will only plug into V2.x OOPic II Expansion Boards.
More Detail |
|
TS-020-004 |
$27.95
In Stock
|
|
|
|
|
|
Trekker Wheel Encoder Package (4 Sensors)
This is the same as TS-036-002 with two extra sensors that can be used to look at the floor for white/black contrast of holes. This kit will only plug into V2.x OOPic II Expansion Boards.
More Detail |
|
TS-036-004 |
$29.95
In Stock
|
|
|
|
|
UVTRON Deluxe Bracket and Line of Site Mask
This bracket/housing has two roles. It provides a mounting pad and hardware for the Hamamatsu UVTron Flame Detector Kit and it also provides a mask to limit the field of view of the sensor.
More Detail |
|
TS-030-000 |
$29.95
In Stock
|
|
|
|
|
Trekker SRF04 Ultrasonic Scanner Package
The Ultrasonic detector is a Devantech SRF04 Ultrasonic ranger that mounts too many locations on the Trekker. The sender mounts to the rear or front of the Trekker chassis, front scanner brackets, or bumper switches.
More Detail |
|
TS-009-004 |
$33.95
In Stock
|
|
|
|
|
|
Trekker SRF05 Ultrasonic Scanner Package
The Ultrasonic detector is a Devantech SRF05 Ultrasonic ranger that mounts too many locations on the Trekker. The sender mounts to the rear or front of the Trekker chassis, front scanner brackets, or bumper switches.
More Detail |
|
TS-009-005 |
$33.95
In Stock
|
|
|
|
|
Trekker Bumper Switch Package
The same bumper switch can be mounted on the front and/or back of the Trekker chassis. The bumper switch will detect an obstacle after making intimate contact.
More Detail |
|
TS-010-000 |
$34.00
In Stock
|
|
|
|
