IG52-02 24VDC 290 RPM Gear Motor - DISCONTINUED

  • IG52-02 24VDC 290 RPM Gear Motor - DISCONTINUED

Features and Specifications

These specifications are listed with the "rated" values (these are the values where the motor runs at peak efficiency). The motors can deliver considerably more than their rated values, refer to datasheet for more information.

  • 24VDC
  • Reduction Ratio: 1:19
  • Rated Torque: 8.5 kgf-cm
  • Rated Speed: 290 RPM
  • No Load Current: < 750mA

Recommendations

We recommend controlling the motors with one of our motor speed controllers. See our motor controller support page for more information. We also recommend you use our wiring kit to wire your motors to control the electronic noise generated from any DC motor. See our motor wiring support page for more information.

These 24VDC Type 02 52mm diameter gear motors are made with steel gears (not plastic or sintered metal). They are real stout motors. They weigh about 2.5lbs each. We sampled many other manufactures and the gears would strip or the windings would burn up, we had no failures with these.


IG52-02 24VDC 290 RPM Gear Motor - DISCONTINUED

  • $171.60

This product is unavailable.

Contact us if you have any questions.