Sanyo Pancake Stepper Motor 200 Steps per Rev 42×18.6mm 5.4V 1A per Phase - DISCONTINUED

  • Sanyo Pancake Stepper Motor 200 Steps per Rev 42×18.6mm 5.4V 1A per Phase - DISCONTINUED

Features and Specifications

  • Size: 42 mm square × 18.6 mm, not including the shaft
  • Weight: 140 g (4.9 oz)
  • Shaft diameter: 5 mm
  • Steps per revolution: 200
  • Current rating: 1 A per coil
  • Voltage rating: 5.4 V
  • Resistance: 5.4 Ohm per coil
  • Holding torque: 1.9 kg-cm (26 oz-in)
  • Inductance: 2.9 mH per coil
  • Lead length: 12 in

Recommendations

Stepper motors are generally used in a variety of applications where precise position control is desirable and the cost or complexity of a feedback control system is unwarranted. Here are a few applications where stepper motors are often found:

  • Printers
  • CNC machines
  • 3D printer/prototyping machines
  • Laser cutters
  • Pick and place machines
  • Linear actuators
  • Hard drives

Documentation

This pancake bipolar stepping motor from Sanyo has a 1.8° step angle (200 steps/revolution) and a holding torque of 1.9 kg-cm (26 oz-in). Each phase draws 1 A at 5.4 V. The motor has four color-coded wires terminated with bare leads: red and yellow connect to one coil; orange and blue connect to the other. It can be controlled by a pair of suitable H-bridges (one for each coil), but we recommend using a bipolar stepper motor driver. For more information, see the datasheet (385k pdf).


Sanyo Pancake Stepper Motor 200 Steps per Rev 42×18.6mm 5.4V 1A per Phase - DISCONTINUED

  • Product Code: TD-113-000
  • Availability: Discontinued

This product is unavailable.

Contact us if you have any questions.