Accelerometers, Gyros, GPS, & Compasses

Accelerometers, Gyros, & Compasses. GPS Global Positioning System receivers. Measure acceleration and track rotation with these accelerometers, gyroscopes, compasses/magnetometers, and combined inertial measurement units (IMUs) and orientation sensors. Measure your location with the satellites using a GPS.

Category Items

IPS - Indoor Navigation Positioning System Starter Kit with IMU (HW v4.9) Indoor GPS Starter Kit featuring one Modem and five Beacons to get your project running. Accurately position your robot to a couple centimeters indoors! Kit includes 4 standard beacons and 1 beacon with built in IMU. TS-078-200 $429.00 7 Ready to Ship!	IPS - Indoor Navigation Positioning Beacon with IMU (HW v4.9) Mount beacons on walls or ceilings to measure distance to other beacons and “hedgehog” using ultrasonic pulses. They communicate with router wirelessly in ISM band. Powered by LiPo battery or USB. The beacon has a built in Inertial Measurement Unit (IMU). TS-078-010 $89.00 10 Ready to Ship!
IPS - Indoor Navigation Positioning Beacon (HW v4.9) Beacons are mounted on walls or ceilings to measure distance to other beacons and “hedgehog” using ultrasonic pulses. They communicate with router wirelessly in ISM band. Powered by LiPo battery or USB. Indoor Positioning System (IPS) TS-078-002 $69.00 3 Ready to Ship!	IPS - Indoor Navigation Modem The router is the central controller of the indoor GPS system. It communicate via USB with the dashboard and with the beacons, wirelessly in ISM band. Indoor Positioning System (IPS) TS-078-001 $69.00 1 Ready to Ship!
Programmable GPS Navigation Package This package includes all the items you would need to make a robot drive to GPS waypoints autonomously. TE-910-001 $1,098.00 Out of Stock. Contact us for availability.	6DOF MPU-6050 Gyroscope and Accelerometer Module The InvenSense MPU-6050 sensor contains an accelerometer and a gyroscope in a single chip. It is very accurate, this sensor is used in self balancing robots, drones, smartphones, etc. The sensor uses the I2C-bus to interface with microcontroller. TS-077-000 $10.95 34 Ready to Ship!
Garmin GPS 18x 5Hz The GPS 18x is an OEM, high-sensitivity GPS sensor for use in automotive, fleet vehicle, and electronics applications that require a small, highly accurate GPS receiver. TS-076-005 ~~$199.99~~ $179.99 19 Ready to Ship!	Garmin GPS 18x LVC The GPS 18x is an OEM, high-sensitivity GPS sensor for use in automotive, fleet vehicle, and electronics applications that require a small, highly accurate GPS receiver. TS-076-000 ~~$79.99~~ $69.99 49 Ready to Ship!
MinIMU-9 v5 Gyro, Accelerometer, and Compass (LSM6DS33 and LIS3MDL Carrier) The Pololu MinIMU-9 v5 is an inertial measurement unit (IMU) that packs an LSM6DS33 3-axis gyro and 3-axis accelerometer and an LIS3MDL 3-axis magnetometer onto a tiny 0.8″ × 0.5″ board. TS-075-000 $15.95 13 Ready to Ship!	66-Channel LS20031 GPS Receiver Module (MT3339 Chipset) The Locosys LS20031 GPS receiver integrates a MediaTek MT3339 66-channel GPS chip with a ceramic antenna to create a complete GPS module that can track up to 66 GPS satellites at a time. The GPS module supports up to a 10Hz update rate. TS-066-000 $49.95 6 Ready to Ship!
Pololu MinIMU-9 v2 Gyro, Accelerometer and Compass (L3GD20 and LSM303DLHC Carrier) The Pololu MinIMU-9 v2 is an inertial measurement unit (IMU) that packs an L3GD20 3-axis gyro and an LSM303DLHC 3-axis accelerometer and 3-axis magnetometer onto a tiny 0.8" × 0.5" board. TS-059-000 ~~$49.95~~ $11.95 3 Ready to Ship!	Buffered 3D 3g Accelerometer The DE-ACCM3D from Dimension Engineering is the most advanced analog accelerometer solution to date, featuring a triple axis ±3g accelerometer chip. TS-044-000 $35.00 6 Ready to Ship!
Buffered 6g Accelerometer The DE-ACCM6G from Dimension Engineering is an off the shelf 2 axis ±6g accelerometer solution with analog outputs. It features integrated op amp buffers for direct connection to a microcontroller's analog inputs, or for driving heavier loads. TS-043-006 $22.95 7 Ready to Ship!	Buffered 2g Accelerometer The DE-ACCM2G from Dimension Engineering is an off the shelf 2 axis ±2g accelerometer solution with analog outputs. It features integrated op amp buffers for direct connection to a microcontroller's analog inputs, or for driving heavier loads. TS-043-002 $22.95 7 Ready to Ship!

Support Links

General Support

Sensor Support

Autonomous Robot Support

Blog - PulsedLight LiDAR Lite

Sample Code on Github

News and Updates

Careers

Newsletter

Blog

Twitter

Facebook

Instagram

YouTube

Request a Quote

Schedule a Demo

1-919-557-9162

New Items

IPS - Indoor Navigation Positioning Beacon with IMU (HW v4.9)

TS-078-010

Mount beacons on walls or ceilings to measure distance to other beacons and “hedgehog” using ultrasonic pulses. They communicate with router wirelessly in ISM band. Powered by LiPo battery or USB. The beacon has a built in Inertial Measurement Unit (IMU).

$89.00

10 Ready to Ship!

NEW Prebuilt Wifi HD2

TP-500-241

After building many custom WiFi HD2 robots, we have combined the most common requests and come up with this standard WiFi HD2 robot.

~~$10,499.95~~ $9,999.00

1 Ready to Ship!

Accelerometers, Gyros, GPS, & Compasses

Robots for Sale

Related Services

Help

Social Networking