IG52-04 24VDC 082 RPM Gear Motor with Encoder

Features and Specifications

These specifications are listed with the "rated" values (these are the values where the motor runs at peak efficiency). The motors can deliver considerably more than their rated values, refer to datasheet for more information.

  • 24VDC
  • Reduction Ratio: 1:43
  • Rated Torque: 33 kgf-cm
  • Rated Speed: 82 RPM
  • No Load Current: < 700mA
  • Dual Channel/Quadrature Encoder mounted to tail shaft of motor. See datasheet in image gallery. (Each channel requires a 1k pull up resitor to Vcc as shown on datasheet.) This pull up board can be used in-line, providing the required pull-ups to Vcc for channel A and channel B.
  • They weigh about 3.5 lbs each.

Recommendations

We recommend controlling the motors with one of our motor speed controllers. See our motor controller support page for more information. We also recommend you use our wiring kit to wire your motors. The hookup kit will help suppress the electronic noise generated from any DC motor. See our motor wiring support page for more information.

  • Brushed permanent magnet DC motor
  • Variable speed and reversible
  • Planetary Gear Box
  • Final drive stages are steel gears (not plastic or sintered metal)
  • Tested extensively on our All-Terrain-Robots
Need a chain drive? Check out our selection of Chains and Sprockets including our D-Shaft Sprockets made specifically for these motors.


IG52-04 24VDC 082 RPM Gear Motor with Encoder

  • $209.74

This product is unavailable.

Contact us if you have any questions.

Related Products

IG52-04 24VDC 136 RPM Gear Motor with Encoder
IG52-04 24VDC 136 RPM Gear Motor with Encoder

Brushed permanent magnet DC motor Variable speed and reversible Planetary Gear Box Final..

Product Code: TD-045-136

$204.19

IG52-04 24VDC 082 RPM Gear Motor
IG52-04 24VDC 082 RPM Gear Motor

Brushed permanent magnet DC motor Variable speed and reversible Planetary Gear Box Final..

Product Code: TD-048-082

$185.85

IG32, IG42, and IG52 Gear Motor Encoder Pull-up Board
IG32, IG42, and IG52 Gear Motor Encoder Pull-up Board

The SDR encoder pull-up board is specifically designed to allow the end user to easily interface wit..

Product Code: TE-179-000

$8.80 $12.58

Dual LS7366R Quadrature Encoder Buffer
Dual LS7366R Quadrature Encoder Buffer

This is a breakout board based on LS7366R quadrature counter IC. The Dual LS7366R buffer board is de..

Product Code: TE-183-002

$65.00

IG52-04 24VDC 044 RPM Gear Motor with Encoder
IG52-04 24VDC 044 RPM Gear Motor with Encoder

Brushed permanent magnet DC motor Variable speed and reversible Planetary Gear Box Final..

Product Code: TD-045-044

$212.52

Single LS7366R Quadrature Encoder Buffer
Single LS7366R Quadrature Encoder Buffer

This is a breakout board based on LS7366R quadrature counter IC. The single LS7366R buffer board is ..

Product Code: TE-183-001

$40.92

Triple LS7366R Quadrature Encoder Buffer
Triple LS7366R Quadrature Encoder Buffer

This is a breakout board based on LS7366R quadrature counter IC. The Triple LS7366R buffer board is ..

Product Code: TE-183-003

$87.88

Quadruple LS7366R Quadrature Encoder Buffer
Quadruple LS7366R Quadrature Encoder Buffer

This is a breakout board based on LS7366R quadrature counter IC. The Quadruple LS7366R buffer board ..

Product Code: TE-183-004

$110.52

IG42 IG52 Encoder Connector
IG42 IG52 Encoder Connector

Connector for IG42 IG52 motors with encoders...

Product Code: TE-305-003

$0.68