This is a 6WD robot that uses six of our heavy-duty 120 RPM Wheel Chair Motors and our 13" Tiller Tires. The wheels are mounted directly to the heavy-duty motor shaft for simplicity. High ground clearance, high payload capacity, and powerful motors make this robot a workhorse. The Enclosed Chassis is made of 1/8" and 3/16" aluminum plate CNC plasma cut and welded together. The robot uses differential steering (movement is based on three separately driven wheels placed on either side of the robot body). It can thus change its direction by varying the relative rate of rotation of its wheels and "pivot turn" in place.
The robot is being sold in the configuration listed below. The robot is assembled without any electronics. For a customized configuration please follow the preceding link and select the options you desire on the bottom of the item page. If further customization is required, please fill out our Custom Robot Request Form. This item does not qualify for free shipping.
See our ATR page for more details about our All Terrain Robots.
This is a stripped-down version of the robot with only mechanical assembly.
This is a 2.5mm x 5.5mm right angle barrel plug with 6ft of 18 gauge wire. This will plug into our camera receivers and some of our cameras.
This is a fully assembled LT2-F robot platform. It is our second generation of the LT robot. It is the same chassis and has the same mechanical components as our tactical LT2-F robot. The LT2 is lighter than the HD2 treaded robot.