The SDR LED Light boards are perfect for directional lighting applications in robotics. PCB Color can vary between green or black.
Please note: The silkscreen for the positive(+) and negative(-) pins are backwards on this board. When hooking it up to power, place the +5v on the side labeled negative(-) and put Gnd on the side labeled positive (+).
The ULN2003APG High Current Driver has 7 NPN Darlington arrays in a 16-SOIC package. This is perfect when you need to use a microcontroller to toggle a relay or control high power LEDs.
This is a High current driver that will take the 5V TTL signal from your Arduino, etc and drive higher current devices @ 0-50 VDC
This is a Custom Configuration HD2 Mastiff Robot with a 6 axis robotic manipulator arm. This robot is loaded with all the options and is ready to ship.
Indoor GPS Starter Kit featuring one Modem and five Beacons to get your project running. Accurately position your robot to a couple centimeters indoors! Kit includes one modem, 4 standard beacons and 1 beacon with built in IMU.